High-pressure Belt Filter Press:Deep Sludge Dewatering and Energy
Saving for Industries -DHP Series
Description:
The DHP Series Belt sludge deep dewatering system adopts the
Internet of things technology, the whole process is visualized, and
it can perform remote operation, remote diagnosis, and remote
service.
The DHP Series Belt sludge deep dewatering system can meet the
solid content of the incoming mud as low as about 2%. By adjusting
the operating conditions, the solid content of the mud is
significantly improved (20% -40%); The output of dry sludge can be
dry incineration, sanitary landfill, and general land use.
The DHP Series Belt sludge deep dewatering system occupies a small area, which is suitable for new sludge dewatering
projects and can also be conveniently used for sludge dewatering
reconstruction of old plants
The DHP Series Belt sludge deep dewatering system adopts a fully
sealed structure, with good working environment conditions, and can
achieve the goal of deep sludge dewatering with low energy
consumption. It is an excellent low-carbon environmental protection
equipment.
Features:
1. Abnormal Deviation Correction Device
Automatic continuous detection; Correct filter cloth deviation;
Ensure the machine's regular operation and increase the filter
cloth's service life.
2. Sludge Distributor
Spread the concentrated sludge evenly on the upper filter cloth to
ensure that the sludge is pressed evenly, improve the dehydration
rate and extend the service life of the filter cloth.
3. Cylinder Three-point Combination Tensioning Device
Tensioning the filter cloth through cylinder tension to ensure
stable, leak-free, and high-safety operation within a certain
range.
4. Pneumatic Triple
Composed of Air Filter, Pressure Reducing Valve, and Oil Mist
Collector, it can effectively filter water in the air, lubricate
pneumatic components, and extend the service life of pneumatic
components.
5. Pressing Roller
Made of SUS304, TIG reinforced welding, and after finishing, the
structure is fastened without breaking.
6. Synchronous Wheel
The driving roller of the pressing section adopts the synchronous
gear design, which is reliable in operation, low in failure rate,
easy to maintain, and improves the stability of operation.
7. Waterproof Ring
Installed on the inner side of the bearing, it can prevent the
dehydrator from splashing water from the inner side to the inside
of the bearing during operation and extend the service life of the
bearing.
8. Box Bearing
This bearing is suitable for high-pressure working conditions and
adopts a fully enclosed structure, which can prevent the entry of
dust and mud, extend the service life of the bearing, and make it
easy to replace the bearing at a later stage.
9. Multifunctional Electric Cabinet
Electrical components adopt internationally renowned brands such as
Omron Schneider. The PLC adopts Siemens, and the frequency
converter adopts Danfoss and ABB from Germany, with stable
performance and easy operation. It is equipped with a leakage
protection device to ensure safe operation.
10. Precision Feeder
Mainly composed of two parts: arch breaking and conveying. The
arch-breaking device can effectively prevent the bridging of the
conditioner, and the required amount of medicine can be accurately
dosed by screw conveying.
11. Main Drive
Adopting an internationally renowned brand NORD reducer to ensure
stable operation, long service life, and low maintenance costs. In
addition, SEW brand reducers can be selected according to the
situation.
12. Filter Cloth
Using domestic high-quality filter cloth or imported from Germany,
the filter cloth is excellent in water filtration, durability, and
corrosion resistance, and is not easy to deform, effectively
reducing the moisture content of mud cake.
Process:
1. Introduce thickening tank sludge into the conditioning tank to
improve sludge properties;
2. The pretreated sludge then enters the thickening section;
3. The moisture content of the sludge is reduced to about 85%;
4. Add an appropriate amount of sludge conditioner, mix evenly, and
dehydrate under high pressure;
5. Further reduce the moisture content of sludge to 60% or below.
How Our Belt Filter Press Works:
Technical Data & External Dimensions of Belt Filter Press:
Welcome to DUBHE:
Q1: How to pay?
A:100％T/T, Paypal, West Union, MoneyGram, Secure payment and Trade
Assurance.
Q2: What's the delivery time?
A: 30-60 days.
Q3: What's the MOQ?
A:1set.
Q4: Do you have an inspection report for the material?
A: We can provide the certificate.
