Small Automatic Casting Vacuum Induction Metal Melting Furnace
Introduction of Automatic Casting Vacuum Induction Metal Melting
Furnace
The automatic casting vacuum melting furnace is a small vacuum
melting furnace developed by our company according to the actual
experimental needs. It has a series of functions of automatic
swing, automatic rotation, automatic casting and sample testing
during the melting process. With infrared temperature measurement,
the experimental data can be viewed in real time.
Application of Automatic Casting Vacuum Induction Metal Melting
Furnace
The automatic casting vacuum furnace can melt metal materials (such
as stainless steel, nickel-based alloy, copper, alloy steel,
nickel-cobalt alloy, rare earth neodymium-iron-stilbium, etc.)
under vacuum and protective atmosphere, and can also carry out
vacuum refining treatment and precision casting of alloy steel ,
can also be used as pre-preparation equipment for direct reading
spectrometer and X-ray fluorescence spectrometer analyte, can
prepare various ores, oxides, ferroalloys, and can use two alumina
crucibles at the same time (spin, swing + mold function) Melted to
produce two ferroalloy samples at a time.
Main technical parameters of laboratory small vacuum Induction
melting furnace
| S/N | Items | Specification |
| 1 | Product name | Automatic Casting Vacuum Induction Melting Furnace |
| 2 | Power supply | 15KW |
| 3 | Power supply voltage | 380V, 3 phase, 50/60Hz |
| 4 | Temperature | Max. 1750°C (with infrared temperature measurement, thermocouple
temperature measurement) |
| 5 | Crucible capacity | 0.5kg (recorded as molten steel) |
| 6 | Crucible material | Alumina or graphite |
| 7 | Coil configuration | 1 piece |
| 8 | Ultimate vacuum degree | 5Pa |
| 9 | Protective atmosphere | nitrogen, argon ≤ 0.05MPa |
laboratory small vacuum Induction melting furnace Structure:
This vacuum furnace is composed of furnace cover, furnace body,
furnace bottom, crucible rotary mechanism, vacuum system and
intermediate frequency power control system.
The furnace cover, furnace body and furnace bottom all adopt a
double-layer water-cooled structure to keep the temperature of the
furnace shell below 60°C.
The small induction furnace cover is opened manually, and there are
observation holes and baffles on the furnace cover. In order to
facilitate the addition of alloy elements during the melting
process, an alloy feeder is specially provided on the furnace
cover.
There is an induction coil in the furnace body, and the melt in the
crucible can be easily poured into the ingot mold by manually
turning the handle outside the furnace. The ingot mold can be
designed to be water-cooled. The upper part of the crucible is
equipped with a temperature measuring device.
