10/100/1000M Gigabit Ethernet Media Converter With External Power
Supply
10/100/1000Mbps Media Switch Advantages
► Supporting inter-conversion between adaptive
► 10Base-T/100Base-TX/1000Base-T with 1000Base-SX/LX
► Use Port 10/100/1000Base-TX (RJ45), 1000Base-SX/LX (SFP slot)
► Supporting auto-sense of MDI/MDI-X, facilitating system
commissioning and installation
► Supporting Quality of Service (QoS) and ensuring the transmission
of VoIP packets
Fiber Ethernet Media Converter Overview
LNK-3011WSFP is an Ethernet media converter used to convert media
transmission between UTP copper cables and fiber optic SFP (Small
Form Factor Pluggable) transceivers. It complies with the
IEEE802.3, IEEE802.3u, IEEE802.3 z, and IEEE802.3ab standards.
Currently, it supports two types of media network connections:
10Base-T/1000Base-TX/1000Base-T and 1000Base-SX/LX, converting the
electrical signal of 10Base-T/100 Base-TX/1000 Base-T twisted pair
to the optical signal of 1000Base-SX/LX. It extends the
transmission distance of the network from 100 meters of copper
cable to 120 kilometers of fiber optic cable.
Gigabit Fiber Media Converter Technical Indexes
Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast
Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX
Gigabit Ethernet |
Wavelength | 850nm/1310nm/1550nm |
Transmission distance | multi-mode Dual-fiber: 220m (62.5/125μm)/550m (50/125μm) |
single mode Dual-fiber: 20/40/60/80 Km |
single mode Single fiber: 20/40/60/80 Km |
Category-5 twisted pairs: 100m |
Port | One RJ45 port: for connecting with STP/UTP category-5 twisted pairs |
One optical port: SFP 3.3V |
Conversion means | Media conversion |
BER | <10-9 |
MTBF | 100,000 hours |
LED indicator | POWER (power supply), FX LINK (optical link action), TP LINK1000
(TP cable rate1000M), TP LINK100 (TP cable rate 100M), TP ACT (TP
cable packet forwarding action) |
Power supply | External Power: AC90~240V input, 5V2A output |
Power consumption | 5W |
Operating temperature | -10~55ºC |
Operating humidity | 5%~90% |
Maintaining temperature | -40~70ºC |
Maintaining humidity | 5% ~ 90% non-condensing |
Dimensions (W x D x H) | 71 x 94 x 26 mm |
Commercial SFP Fiber Media Converter Ordering Information
LNK-3011WSFP | 10/100/1000Base-T to 1000Base-F,SFP slot, excl. SFP module,
standalone, external power adaptor |
