Digital Temperature Controller Salt Spray Test Chamber for
Reliability Tests
Introduction:
Salt Spray Tester is used to test the anti-erosion quality of the
surface of all materials after the rust-proof of painting, coating,
electroplating, anoding and rust-proof of greasing.anti corrosion
treatment for a variety of materials, corrosion resistance of their
products.
Salt spray test chamber is used to test the reliability of
corrosion resistance of the tested samples by means of salt spray
corrosion. Salt spray refers to the dispersion system composed of
tiny droplets containing salt in the atmosphere, which is one of
the three prevention series of artificial environment. Many
enterprise products need to simulate the damage caused by the
surrounding climate on the products, so the salt spray test chamber
should be shipped. Salt spray test is divided into two kinds:
neutral salt spray and acid salt spray. The difference lies in the
standards and test methods they meet. They are called "NSS" and
"CASS" test respectively, which are the most common test methods in
artificial climate protection.
Corresponding Standard:
GB11158 GB10589-89
GB10592-89
GB/T10586-89
GB/T2423.22-2001
GB/T2423.1-2001
GB/T2423.2-2001
GB/T2423.3-93
GB/T2423.4-93
ASTM D1735
IEC60068-2-1.1990
IEC60068-2-2.1974
IEC 68-2-30 IEC68-2-03
EIA - 364-31C
EIA - 364-59
ASTM B117
Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to
clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to
ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower
tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
product description:
| Model | B-SST-60 | B-SST-90 | B-SST-120 | B-SST-160 | B-SST-200 |
Internal Dim(W*H*D) | 60x45x40 | 90x60x50 | 120x100x50 | 160x100x50 | 200x100x50 |
External Dim(W*H*D) | 108x63x119 | 140x80x139 | 178x120x149 | 230x130x149 | 270x130x159 |
Cabinet Material |
Corrosion-resistant polymer material |
Laboratory temperature (℃) | A:25℃~70℃ B:0℃-70℃ C:-20℃-70℃ D:-40℃-70℃ |
Saturated air barrel temperature(℃) | 35±1℃50±1℃
Saline test method:35±1℃/Corrosion test method:50±1℃ |
Saturated air pressure (kg/c㎡) | 0.8-2.0±0.01 |
(ml／80c㎡.h)
Salt spray sedimentation rate (ml/80c㎡.h) | 1-2ml/80 cm2.h(Controllable) |
PH value | Salt water test method:6.5～7.2／Test method for corrosion resistance:3.0-3.2
Saline test method:6.5-7.2/Corrosion test method:3.0-3.2 |
Power Source | AC:220V 50Hz/AC:380V 60Hz |
Our Company:
Shanghai BOTO GROUP LTD is a high technology company specializing
in integrated incubation systems. We are conveniently located in
Shanghai City.
With 20+ years of incubator R&D experience from our technical
team, we have developed several series of the advanced integrated
hatchery system.
Also we have gained the Authorized Poultry Industry R&D Center
and been awarded the High-tech Enterprise by Chinese government.
Also, both our company and products are approved by ISO9001,
ISO14001, ISO45001, ISO50001
Packing/Shipping:
FAQ:
1. Are a manufacturer? Do you offer after-sales service? How can I
ask for that? And how about the warranty?
-Yes, we are manufacturer of 1000L Touch Screen Laboratory
Equipment Constant Temperature Humidity Climatic Test
Chamber/Equipment/Machine/Cabinet . Every machine from our factory
has a 12 months product warranty.If your machine doesn’t work, you can send E-mail to us and we will
try our best to find the problem by email or video chat if
neccesary. After confirmation of the problem, we can send you new
spare parts or provide on-site repair.
2. What’s the delivery term?
-If there is no stock, normally, the delivery time is 15-25 working
days after deposit receipt. If you are in urgent need, we can
consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the
machine?
-Yes, of course. We can not only offer standard machines, but also
customized
machines according to your requirements. And we can also put your
logo on the machine
4. what about the products' quality?
-Each batch of parts is done quality sampling inspection before
into the warehouse, and Each product before delivery is tested by
the national authoritative third-party inspection agency.
5.what about the packing of equipment?
-We use Standard Export Plywood Case to Protect it from rust during
the long time shipping with the plastic film and protect its
corners with the foam.
