Reclaimed Rubber Sheet Making Machine With CE&ISO
1. Reclaimed rubber sheet line Description:
Full Automatic Production Line Process:
Rubber Powder →Dynamic desulfurization Tank→ Rubber Mixing
Machine→Rubber Sheet →Reclaim Rubber Refining Mill → Reclaim Rubber
Application:
- Process the waste rubber powder into reclaimed rubber
- And the reclaimed rubber can be used for tyre industry,water proof
material,road construction,shoe sole ec
- whole line automatic control.We design PLC and central control
system from De-vulcanizing to mixing ,sheeting and weight packing.
2. Reclaimed rubber line lightspots display:
Environmental protection: No waste gas and waste water
Daily output: 30 tons
Quality: Meet and exceed national standards
Energy consumption: Powder saving more than 20% than dynamic desulfurization tank per
ton
Rubber Powder mesh: 8-24 mesh
Nominal strength under tension: ≥ 10MPa
Usage: Horizontal type rubber mixing mill is mainly used in following cases for reclaimed rubber
products factory: reclaimed rubber refining, raw rubber and
compound ingredient mixing, warming refining and sheeting of glue
stock. This machine can reassure well lubricating and easy
operation for it adopting oil cup lubrication.
| Technical parameter Type | XKJ-400 | XKJ-450 | XKJ-480 |
| Front roll diameter(mm) | 400(Waist-drum) | 450(Waist-drum) | 480(Waist-drum) |
| Rear roll diameter(mm) | 518(Waist-drum) | 510(Waist-drum) | 612(Waist-drum) |
Working length of rolls
(mm) | 760 | 800/1000 | 800 |
Front roll surface speed
(m/min) | 25 | 48/32 | 22.97 |
| Friction ratio | 1: 1.707 | | 1: 1.82 |
| Max. nip(mm) | 10 | 10 | 15 |
| Motor power (kw) | 45 | 55 | 75 |
Overall dimension
Length× Width× Height
(mm) | 4770× 2300
× 1835 | 4700× 2100
× 1400
4900× 2300
× 1450 | 5070× 2800
× 1978 |
| Key words | Rubber machinery, refining machine, reclaimed machine, rubber
refining mill, rubber machine |
| Technical parameter Type | XKJ-400 | XKJ-450 | XKJ-480 |
Usage: is mainly used for refining of reclaimed rubber and rubber sheeting
Features:.
1. The rollers are made of chilled cast iron with wear-resistant
hard surfaces.
2. The two rollers are smooth ones with bored cavities and can be
cooled homogeneously.
3. The protective device is provided to protect the main parts from
damage due to overload. In case of emergency, the safety rod is
pulled down and the rollers will be stopped immediately.
Packaging
Equipment painting completed before delivery, and then wrapped with
stretch film, avoid rubbing the paint off the surface, wooden
packaging can be customized, key parts, such as electronic control
box, will be wrapped by shockproof packaging materials, and then
packed in wooden cases.
FAQ
1. What does your factory do regarding quality control?
We pay much more importance to quality control from the very
beginning to the end of production. Every machine will be fully
assembled and carefully tested before shipment.
2. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand
components to keep our machine in perfect working condition.
3. Are you able to give installation and commissioning overseas?How
long time will it take?
Yes, we can supply overseas service and technical support but
customer needs to pay for the cost of the installation. Small
machine usually takes within 2~3 days. Big production line usually
takes about 30 days.
4. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed
and confirmed in the order. The core of our company culture is
innovation,qua
lity,integrity and efficiency. Also we have had many good
cooperation with world famous rubber production manufacturers.
If you come to our factory, we can show the user around us.
5. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name
of airport is Qingdao Jiaodong airport. We will pick up you at the
airport.
Before leaving factory, this plate vulcanizing press needs to pass
24 hours' pressure test, pressure maintaining to test the bearing
of the hydro-cylinder and piston stroke and guarantee no oil
leakage and seeping to avoid unnecessary quality problems.
We can design and manufacture all kinds of non-standard plate
vulcanizing press according to the customers' definite
requirements.
Our Services
♦ Our engineers can design target machines for customers and send
them the drawing to confirm. We are always on the side of saving
your cost.
♦ In the process of production, we will take photos and send to
customers for their track the progress.
♦ Documents such as packing list, commercial invoice, and bill of
lading etc. will be sent after the delivery.
♦ We could supply free English foundation DWG, installation
drawing, user guide, maintenance manual and part drawing.
♦ We supply overseas engineer service and help to train your
workers to operate the machine.
