EMC High Power Amplifier 80-1000 MHz Psat 400 W Wideband Power
Amplifier
Description
The chassis is designed for both military and commercial
applications. The latest device technologies and design methods are
employed to offer high power density, efficiency, and linearity in
a small, lightweight package.
Specification
Typical performance at 220V AC +25oC, and in a 50Ω system.
| RF / ELECTRICAL |
| PARAMETER | MIN | TYP. | MAX | UNIT |
| Operating Frequency | 80 | | 1000 | MHz |
| RF INPUT | | 0 | 5 | dBm |
| Power Gain | | 56 | | dB |
| P-1dB Output Power | | 300 | | W |
| P-sat Output Power | | 400 | | W |
| Power Gain Flatness | | ±3.5 | | dB |
| In/Out Impedance | | 50 | | Ω |
| Spurious Signals | | | -65 | dBc |
| Harmonic Signals | | -15 | | dBc |
| Gain Adjust Range | | 31.5 | | |
| Gain Adjust Ste | | 0.5 | | |
| Operating Voltage | 200 | 220 | 240 | V AC |
| Supply Power | | | 3000 | W |
| Input VSWR | | | 2 | |
| MECHANICAL |
| PARAMETER | VALUE | UNIT |
| Dimensions (W x D x H) | The standard 19-inch shelf is 5U high, 482*600*223 | mm |
| RF Connectors (Input / Output) | N-K / N-K (N female) | -- |
| Control Connector (Option1) | DB9:Power on/power off control, gain control; Monitoring parameters
include output power, temperature, supply voltage, and supply
current | -- |
| Control Connector (Option2) | RJ45:Remote control and monitoring can be realized through LAN | |
| Cooling | Built-in cooling system, forced air cooling | -- |
| Weight | ≤40 | kg |
| AC Connector | Three-in-one air switch | |
| ENVIRONMENTAL / PROTECTIONS |
| PARAMETER | MIN | MAX | UNIT |
| Operating Temp. | -25 | +55 | °C |
| Housing Temp. | -45 | +55 | °C |
| Amplifier Safeguard Temp. | +80 | °C |
| Protections | With over temperature protection, input over power protection, over
voltage protection, over current protection, output mismatch
protection | |
| INPUT/OUTPUT panel Connector |
| AMPLIFIER CONNECTOR TYPE: | —— |
| TRIAD CABLE PART NUMBER: | —— |
| NUMBER | interface type | DESCRIPTION |
| X1 | N-FK | RF IN |
| X2 | N-FK | RF OUT |
| X3 | LCD display | Human-computer interaction interface |
| X4 | Three-in-one air switch | AC/220V/50Hz |
| X5 | RJ45 | LAN |
| X6 | DB9 | Control interface |
| X7 | N-FK | Forward coupling port |
| X8 | N-FK | Reverse coupling port |
| Connector Definition |
| AMPLIFIER CONNECTOR TYPE: | DB9 |
| TRIAD CABLE PART NUMBER: | —— |
| NUMBER | Definition | DESCRIPTION |
| 1 | PA Enable | TTL Hi= Enable, TTL Lo = Disable or No Connection |
| 2 | Output Power monitoring | Output Power Detection (TTL Hi= Normal , TTL Lo =Fault ) |
| 3 | Temp monitoring | Temp monitoring alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 4 | Voltage monitoring | Voltage monitoring alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 5 | Current monitoring | Current monitoring alarm (TTL Hi= Normal , TTL Lo =Fault ) |
| 6 | RXD | RS232 serial bus interface, PA gain adjustment |
| 7 | TXD |
| 8 | GND |
| 9 | NC | NC |
Nanjing Shinewave Technology Co., Ltd. is a company specializing in
the research and development, production and sales of RF microwave
active and passive components and subsystems. The company's product
field covers a variety of microwave communication devices,
including microwave filters, duplexers, amplifiers, frequency
sources, and related subsystems, which are widely used in mobile
communications and other fields.
In terms of microwave filters, the company has comprehensive
products and strong design capabilities. The main products include
cavity band-stop filter, waveguide filter, electrically tunable
filter, multi-frequency combiner, multi-frequency combining
platform POI, dielectric cavity dual-mode filter, LC filter,
miniaturized comb filter, interdigital filter, etc.
In order to meet the special needs and higher index requirements of
customers, in addition to standard products, we provide customized
product development methods, and wholeheartedly provide customers
with fast and high-quality products and services.
Shipment:
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample ususally take within 3 working days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: For standard product, usually 1pcs/item. For the OEM order, MOQ
at least 50pcs/item.
Q4. How to proceed an order?
A: After buyer confirm the product&price is ok and ready to
buy, order will be please tell us your delivery address, phone
number, sometimes need email. Then we can draft the order and it
will have a alibaba paying link.
Q5. After paid, what info of the supplier provided?
A: Tracking number
Q6: Do you offer guarantee and after-service for the products?
A: Yes, 6- 12 months warranty for our products. Note: We will do
not take the responsibility for Man-made damage or improper
operation. Delivery demage will be negotiate
