Run Quickly And Long Life TCI Tricone Bit For Wide Range Of
Drilling Requirements
Click here for catalogueTCI DRILL BIT.pdf
Bits Cutting And Application
These bits are characterized by large diameter, widely spaced
chisel or sharp conical inserts with high projection. This
configuration promotes maximum penetration rates in softer
formations. Smaller carbide inserts are provided on the gage and
inner rows to contain shell erosion and improve performance.
Tricone drill bit is the best all-purpose drill bit and can be used
for many different types of rock formations, such as Soft Rock
Formations (consist mainly of sand, clay, limestone or shale),
Medium Rock Formations (calcites, dolomites, hard limestones, and
some hard shale), Hard and Abrasive Formation (hard shale,
calcites, mudstones, chert, pyrite, granite, quartzite, and cherty
lime stones).
How to read an IADC Code properly
| First Digit | TOOTH |
| 1 | Steel tooth bits for Soft Formation |
| 2 | Steel tooth bits for Medium Formation |
| 3 | Steel tooth bits for Hard Formation |
| 4 | TUNGSTEN CARBIDE INSERT BITS
For varying formation hardness with 4 being the softest and 8 the
hardest. |
| 5 |
| 6 |
| 7 |
| 8 |
| Second Digit | FORMATION |
| 1 | 1,2,3 and 4 are further breakdown of formation with 1 being the
softest and 4 the hardest. |
| 2 |
| 3 |
| 4 |
| Third Digit | BEARING/SEAL TYPE |
| 1 | Standard open bearing roller bit |
| 2 | Standard open bearing roller bit, air-cooled |
| 3 | Standard open bearing roller bit with gauge protection |
| 4 | Sealed roller bearing bit |
| 5 | Sealed roller bearing bit with gauge protection |
| 6 | Journal sealed bearing bit |
| 7 | Journal sealed bearing bit with gauge protection |
| Fourth Digit | ADDITIONAL FEATURES |
| A | Air application |
| R | Reinforced welds |
| C | Center jet |
| S | Standard steel tooth |
| D | Deviation control |
| X | Chisel insert |
| E | Extended jet |
| Y | Conical Insert |
| G | Extra gage protection |
| Z | Other insert shape |
| J | Jet Deflection |
Advantage:
High quality----strictly act according to the ISO9001 standard, and all bits
are manufactured according to strict standards, set forth by the
American Petroleum Institute (API).
Propessional Equipment---- No matter raw material selection, or
processing technology are selected is the industry leading
technical equipment.
16 Years History---- From 2003 to 2019, customers are located all over the world
and win a good reputation.
Main Products We Provide
We mainly provide Tricone Bits(Rock Drilling Bits), DTH Bits and
PDC Bits for mining rock drill , water well drilling and oil well
drilling.
Don’t see the bit you are looking for? Give us a call, we can
customize any bit to fit your unique circumstances.
1). Tricone Bits:
a). Type: Tungsten Carbide Insert (TCI)
b). Formation Application: Soft to Hard Formation
c). Size Available: 3''~26''
d). Popular IADC Code: IADC545,645,725,735,745,825,835
2). DTH Bits:
a). Type: Tungsten Carbide Insert (TCI)
b). Formation Application: Soft to Hard Formation
c). Size Available: 2.8''~26''
d). Popular IADC Code: IADC117/137, 217/237, 317/337, 417/437,
517/537, 617/637
3). PDC Bits:
a). Type: Matrix Body and Steel Body
b). Formation Application: Soft to Hard Formation
c). Size Available: 3 1/2''~26''
d). Popular IADC Code: 121/122/123, 221/223/224,
323/324/332/333/334/343,
423/424/432/433/443
Don’t see the bit you are looking for? Give us a call, we can
customize any bit to fit your unique circumstances.
