High Speed Small Head 7G 10G 13G Work Gloves Machine
PRODUCT DESCRIPTION:
The industrial hand glove making machine adopts a high-quality
sinker weaving system with high-quality materials and superb
processing and assembly techniques. The electronic control system
is stable, simple and easy to operate. Equipped with self-stop
protection devices such as yarn breakage, poor doffing, counting,
motor overload, etc., to increase output. Suitable for all kinds of
raw materials, it can knit full-finger, half-finger, cold-proof and
warm gloves, and can also knit light-weight labor protection gloves
for construction sites and factories. Optional hot-melt yarn
device, code change device, two-color three-color device,
half-finger, finger-finger, finger-two-color device, etc.
PRODUCT FEATURES:
| Contacts | 7G | 10G | 13G |
| size | L3:58/L2:52/L:46/M:42/S:37 | L3:73/L2:68/L:63/M:58/S:53 | L3:98/L2:93/L:88/M:83/S:78/XS:73 |
| Average yield | 18 pairs/hour | 14 pairs/hour | 7 pairs/hour |
| Container capacity | 48 units/20’FT; 96 units/40’HQ |
| power supply | Single-phase power supply,220V,140W |
| Fuel supply method | Automatic oil supply |
| Weave density | Stepper motor control |
| control and display system | Computer control, 7-inch touch screen display, USB data
transmission |
| Transmission system | Belt drive, AC servo motor |
| Nose | Ultra-small and ultra-thin head design |
| size | 1000mm(L)*600mm(W)*1100mm(H) Dimensions without yarn holder |
PRODUCT DETAILS
Ultra small nose
The ultra-thin and ultra-small machine head greatly reduces its
operating load and energy consumption. The lightweight machine head
can reduce the inertial impact force generated by its reciprocating
motion, achieve rapid rotation, and improve the efficiency of the
preparation.
Needle bed
Formed by inserting special high-precision plates.These needle
plates are made of special steel using state-of-the-art hardening
technology, providing high strength and durability for high-speed,
high-quality product manufacturing.
Rubber density motor
The stepping motor is used to uniformly transport the length of the
rubber thread, which can quickly and conveniently adjust the width
of the mouth of the glove.
servo motor
The servo motor is used as the main control motor to accurately
control the reciprocating movement of the machine head, which
greatly reduces the complicated transmission components of the
previous glove machine and eliminates mechanical failures.
Automatic oil supply
The intelligent oil supply system automatically adds lubricating
oil to the required parts to reduce wear.
APPLICATION FIELDS
Maintenance of Glove Making Machines:
NOTE: Always turn off the power when performing full maintenance on
the machine.
1. Check the air filter once a week to remove the scale inside.
2. Clean the oil pump once a year and clean it with detergent.
3. The needle plate and sink seat are most likely to accumulate
dust, and if they cannot be cleaned in time, it will have adverse
effects.
4. Please dust off the flannel on the needle plate and other parts
every 8-12 hours, and blow it off with an air gun.
PACKAGE AND TRANSPORT:
To make sure the product you buy is safe during transportation,we
use plastic package+wooden package.
In addition,we provide complete packaging methods according to your
requirement,and provide convenience for loading,uploading and
storage as well as save time for checking and delivery.
