Din Rail Industrial 12V DC 802.3Af/At PoE Splitter With 2-Port
Switch Function
12V DC PoE Splitter Functional Description
► 12VDC output voltage
► Supports output power up to 20W
► Short-circuit protection for power output
► IP40 rugged metal housing and fanless
► Extensive LED indicators for PoE diagnostics
Outdoor 802.3at PoE Power Splitter Technical Indexes
Standards | IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet |
IEEE 802.3ab 1000Base-T Gigabit Ethernet |
IEEE802.3af Power over Ethernet |
IEEE802.3at Power over Ethernet |
Processing Type | Forward |
Half-duplex, Full-duplex |
Forward Filter Rate | 1,488,000pps (1000Mbps) |
Cabling | 1000Base-T: Cat5 or above |
Maximum Distance | Cat5 UTP up to 100m |
Interface | “PoE (Power + Data)” Input Port: 1 x RJ-45 10/100/1000Base-T |
“Data” Out Port: 2 x RJ-45 10/100/1000Base-T |
DC Out/In Plug Connector: 1 removable 5-Pin terminal block |
Power over Ethernet |
PoE Standard | IEEE 802.3af/at Power over Ethernet |
Number of devices that can be powered | 1 (DC12V) (Vary on device’s power requirement; cannot be over 20 watts.) |
Environmental |
Operating Temperature | -40°C to 80°C (-40°F to 176°F) |
Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity | 5% to 95% non-condensing |
MTBF | >200,000hrs |
Din Rail PoE Splitter 802.3at Overview
The LNK-SPL01 acts as PD equipment and can be powered by standard
PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work
when paired with LNK-INJ301 PoE Injectors. The data transmission,
up to Gigabit speeds, with power output voltages of 12VDC, run
simultaneously up to the Ethernet limit of 100 meters. Simple
settings of the LNK-SPL01, make it a plug and play device,
requiring no tools or software configuration, and provides ease of
use, with flexible installation and high reliability.
With 2-port RJ45 data output, LNK-SPL01 can be function as switch.
With dual power input (PoE input + 12VDC input), the PoE splitter
can work when there is no PoE input, that is to say, LNK-SPL01 can
automatically recognize the power input (default in PoE input,
switch to 12VDC input when PoE not work).
Industrial Gigabit PoE Splitter Ordering Information
Model | Description |
LNK-SPL01 | Industrial PoE splitter with 2-port Switch function: 1-port PoE+ In
+ 2-port Ethernet Data Out (switch function), maximum output of 20
W at 12VDC, Support DIN-Rail mounting and Wall mounting
installation, -40 to 80°C operating temperature |
