Energy Saving 8 tph Rotary Drum Dryer for sand, cement, gypsum
Rotary dryer is used for drying materials with humidity or
granularity in the industries of mineral dressing, building
material, metallurgy and chemical. Rotating dryer can be used for
drying many kinds of materials and with convenient and reliable
operation; Therefore, it has been widely used.
Rotary dryer is also called rotary drying machine. The main body is
revolving cylinder with a small slope. It is composed of the
revolving body, lifting board, driving device, supporting device,
and seal rings etc, with the characteristics of reasonable
structure, perfect in workmanship, high output, low energy
consumption, and convenient operation. Our company can guarantees
the quality of products, credibility first, make the free
installation and debugging, do the agency for consignment, and
complete by quality, service, and price with other factories. At
present, it is still widely used in metallurgical, building
materials, and chemical industry.
1. Structure of rotary drier
Drier also named as Drying Machine and Rotary Drier.Drier is mainly
consist of rotary body, raw material feeding plate, driving and
supporting device, etc
2. Application of rotary dryer
Rotary drier is used to dry slag, clay, limestone, It is mainly
used for cement, chemical, metallurgical, building materials
industries.
3. Working principle of rotary dryer
When rotary Dryer is operating, it shall be in direct contact with
heated gas. The dryer consists of a large rotating cylindrical
tube. In order to convey the material through the underside of
dryer, the dryer should be slanted slightly to ensure that the
discharge end is lower than the end of material feed .
Modal | Technical parameter | Power(kw) | Capacity (t/h) | Weight (kg) |
Inside dia.(m) | Length (m) | Gradient (%) | Rotate speed(r/min) |
| ZT-1.2*6/8 | 1.2 | 6/8 | 5 | 5.8 | 5.5 | 8-12 | 9380/10200 |
| ZT-1.5*12/15 | 1.5 | 12/15 | 5 | 4.8 | 15 | 12-16 | 16450/18240 |
| ZT-1.8*12/14 | 1.8 | 12/14 | 5 | 4.5 | 18.5 | 18-20 | 20000/21000 |
| ZT-2.2*12/14 | 2.2 | 12/14 | 5 | 4.3 | 22 | 22-28 | 37100/38830 |
| ZT-2.4*14 | 2.4 | 14 | 4 | 3.78 | 30 | 30-35 | 50700 |
| ZT-2.4*18 | 2.4 | 18 | 4 | 3.0 | 37 | 35-40 | 54000 |
| ZT-2.4*22 | 2.4 | 22 | 3 | 3.0 | 45 | 38-42 | 57000 |
| ZT-.2.8*20 | 2.8 | 20 | 4 | 3.7 | 40 | 45-55 | 71000/75000 |
| ZT-3.0*22/25 | 3.0 | 22/25 | 4 | 3.2 | 75 | 58-70 | 88000/95000 |
| ZT-3.2*25 | 3.2 | 25 | 4 | 3.0 | 110 | 75-90 | 166000 |
| ZT-3.6*25 | 3.6
| 25 | 4 | 2.7 | 132 | 95-110 | 188000 |
Technical parameters:
| model | cylinder diameter | cylinder length | inclination | Rotate speed/RMP | weight | power | Volume/CBM |
| φ0.6×8 | φ600 | 8m | 3-5 | 8 | 5.1 | 6-pole 4 | 2.26 |
| φ0.8×10 | φ800 | 10m | 3-5 | 7.2 | 6.9 | 6-pole 4 | 5.02 |
| φ1.0×10 | φ1000 | 10m | 3-5 | 6.73 | 7.5 | 6-pole 5.5 | 7.85 |
| φ1.2×12 | φ1200 | 12m | 3-5 | 5.8 | 13.1 | 6-pole 11 | 13.31 |
| φ1.5×12 | φ1500 | 12m | 3-5 | 4.8 | 22.3 | 6-pole 15 | 21.2 |
| φ2.2×14 | φ2200 | 14m | 3-5 | 3.2 | 52.8 | 30 | 53.22 |
| φ2.4×18 | φ2400 | 18m | 3-5 | 3 | 73.3 | 37 | 81.43 |
| φ2.8×24 | φ2800 | 24m | 3-5 | 2.59 | 97 | 75 | 147.8 |
Working Principle of Rotary Dryer: Material shall be dried to enter the dryer. When the dryer is
rotating, a series of internal fins will lift the material by
lining the inner wall of the dryer. When the material reaches
certain height to roll the fins back, it will be fell back to the
bottom of the dryer, then passing through the hot gas stream as it
falls. This gas stream can either move toward the discharge end
from the feed end (known as co-current flow), or toward the feed
end from the discharge end (known as counter-current flow). The gas
stream can be composed of a mixture of air and combustion gases
from a burner, and in which case the dryer is known as a direct
heated dryer. Alternatively, the gas stream may be made up of air
or another (sometimes inert) gas that is preheated. When the gas
stream is preheated by some means where burner combustion gases are
not permitted to enter the dryer, the dryer shall be called an
indirect-heated type. Indirect heated dryers are commonly used when
product contamination becomes a concern.
rotary dryer Detail
Our products have the following six major features,so that we can
lead other manufacturers at home and abroad
Our service:
1. Pre-sale services:
Act as a good adviser and assistant of clients, enable them to get rich and generous returns on
their investments.
1>. Select equipment model;
2>. Design and manufacture products according to clients'
special requirement;
3>. Train technical personnel for clients.
2. Services during the sale:
Respect clients, devote ourselves to improving the total value of
clients.
1>. Pre-check and accept products ahead of delivery;
2>. Help clients to draft solving plans.
3. After-sale services:
Provide considerate services to minimize clients' worries.
1>. Assist clients to prepare for the first construction scheme;
2>. Install and debug the equipment;
3>. Train the first-line operators;
4>. Examine the equipment;
5>. Take initiative to eliminate the troubles rapidly;
6>. Provide perfect service;
7>. Provide technical exchanges.
Q1: How long is the warranty of the rotary Dryer?
A1: Our warranty period is one year generally.
Q2: Can l visit your factory?
A2:Yes. We warmly welcome you to visit our factory. We will take
you to our customer site to have a real look. We will arrange a car
to pick you up at the Xinzheng International Airport.
Q3: Do you provide equipment operation training?
A3:Yes.We can send professional engineers to the working site for
installation, adjustment,and operation training. All of our
engineers have passports.
Q4: Do you provide whole rotary Dryer flow chart?
A4:Yes. Our experienced engineers are specialized in designing
process flow for various project.
Q5: Can you test our samples?
A5:Yes.You can send your samples to us for test and analysis.
Q6. How about price?
A6:Yes, we are factory and are able to give you the lowest price
than market one and we have a policy that “for saving time and
absolutely honest business attitude, we quote as low as possible
for any customer, and discount can be given according to
quantity.contact us.
