Product Characteristics
A. High temperature resistance: Because of the special combination of steel plate substrate and
coating structure, an iron-aluminum alloy is formed, which makes
the aluminized plate have excellent high temperature resistance.
High reflectivity can be guaranteed at 450 C. When the temperature
is higher than 480 C, the appearance of the coating is grey. The
protective layer against oxidation of steel sheet is still well
preserved at 650 C without any falling off.
B. Heat Reflectivity: At 480 degrees Celsius, the aluminized sheet can reflect 80% of
the heat input. Therefore, the aluminized sheet can be used as an
efficient heat insulation barrier or a heat reflector in high
temperature applications, which can rapidly increase the
temperature in the furnace by effective heat reflection.
C. Mechanical Strength: At room temperature, the mechanical strength of aluminized sheet
is the same as that of its base material. At the same temperature
of 480 C, the strength of aluminized steel sheet is 10 times than
that of aluminium sheet, so the thickness of steel sheet can be
reduced by at least 30%.
D. Corrosion resistance: During hot dipping, molten aluminium reacts immediately with
oxygen in the air to form an Al2O3 protective layer, which
passivates the surface of steel plate immediately. The protective
layer is very stable and insoluble in water. Even if the surface of
the steel plate is scratched later, the protective layer has
self-healing function. Therefore, the aluminized sheet has very
strong corrosion resistance to chemical corrosion.
E. Ecological characteristics: Aluminum-Coated-Silicon Steel Sheet without chemical passivation
has no effect on health, so it can be used in food processing.
Testing reports from many professional groups confirm that it is
environmentally friendly. Aluminum plated sheet can be recycled
completely. Aluminum plated sheet can be comparable to stainless
steel, but the price is only about one third of that of stainless
steel. It is widely used in automobiles, motorcycle mufflers,
exhaust pipes and fuel tanks. 2. Burning furnace, heat exchanger,
dryer, air conditioner, etc. 3. Household water heaters, gas
stoves, breadboxes, chimneys, microwave ovens, food processing
machinery, electric ovens, cooking utensils. It can also be used
for building covers, walls, roofs and other insulation components.
F. Others: Standard MAG and TIG welding can be used. It can be used for
drawing, stamping, drawing and other forming processes. Coatings
have durable gloss, better corrosion resistance and weathering
resistance
| Product Name | Aluminum Alloy Coil |
| Standard | AISI ASTM JIS DIN EN and GB |
| Material Grade | 1000 Series:1050,1060,1080,1100,1435,etc. 2000 Series:2011,2014,2017,2024,2A12,2A16,2A06,etc. 3000Series:3002,3003,3004,3104,3204,3030,3A21,etc. 5000 Series:5005,5025,5040,5052,5056,5083,5A05,etc. 6000Series:6003,6060,6082,6083,6063,6061,etc. 7000 Series:7003,7005,7050,7075,etc. |
| Size | Thickness: 0.1mm-200mm Width: 2mm-2200mm Length: As required |
| Temper | 0-H112,T3-T8, T351-851 |
| Surface | mill, bright, polished, hair line, brush,sand blast,
checkered,embossed, etching,etc |
| Price Term | Ex-work, FOB, CIF , CFR, etc. |
| Payment Term | T/T,L/C, Western Union, etc. |
| Delivery Time | 7-14 days |
| Package | Standard export package,or as required. |
| Application | 1)Further making utensil 2)Solar reflective film 3)The appearance of the building 4)Interior decorating; ceilings, walls,etc 5)Furniture cabinets 6)Elevator decoraction 7)Signs, nameplate,bags making 8)Decorated inside and outside the car 9)Household appliances:refrigerators,microwave ovens, audio
equipment,etc |
| Alloy Series | Typical Alloy | Introduction |
| 1000 Series | 1050 1060 1070 1100 | Industrial Pure Aluminium. In all series, 1000 series belongs to
the series with the largest aluminium content. The purity can reach
over 99.00%. |
| 2000 Series | 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 | Aluminium-copper Alloys. 2000 series is characterized by high
hardness, in which the content of copper is the highest, about
3-5%. |
| 3000 Series | 3A21, 3003, 3103, 3004, 3005, 3105 | Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly
composed of manganese. The manganese content ranges from 1.0% to
1.5%. It is a series with better rust-proof function. |
| 4000 Series | 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A | Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%.
It belongs to building materials, mechanical parts, forging
materials, welding materials, low melting point, good corrosion
resistance. |
| 5000 Series | 5052, 5083, 5754, 5005, 5086,5182 | Al-Mg Alloys. 5000 series aluminium alloy belongs to the more
commonly used alloy aluminium series, the main element is
magnesium, the magnesium content is between 3-5%. The main
characteristics are low density, high tensile strength and high
elongation. |
| 6000 Series | 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 | Aluminium Magnesium Silicon Alloys. The representative 6061 mainly
contains magnesium and silicon, so it concentrates the advantages
of 4000 series and 5000 Series. 6061 is a cold-treated aluminium
forging product, which is suitable for applications requiring high
corrosion resistance and oxidation resistance. |
| 7000 Series | 7075, 7A04, 7A09, 7A52, 7A05 | Aluminium, Zinc, Magnesium and Copper Alloys. The representative
7075 mainly contains zinc. It is heat-treatable alloy, belongs to
super-hard aluminium alloy, and has good wear resistance. 7075
aluminium plate is stress-relieved and will not deform or warp
after processing. |
Production Processing
Packing & Delivery
FAQ
1. Q: Are you a manufacturer?
A:Yes, we are manufacturers. We have our own factory and our own
company. I believe we will be the most suitable supplier for you.
2. Q: Can we visit your factory?
A: Sure, we welcome you to visit our factory , check our production
lines and know more about our strength and quality.
3. Q: Do you have quality control system?
A: Yes, we have ISO, BV, MTC, certifications and our own quality
control laboratory.Third party testing services are also available
4. Q: Can you arrange the shipment for us?
A: Yes, we have designated sea freight and railway freight
forwarders with decades of experiences and we get the best price
with earlist vessel and professional service.
5. Q: How long is your delivery time?
A: Generally it is 7days if we have the exact goods in our stock.
If not, it will take around 15-20 days to get goods ready for
delivery.
6. Q: Can I get some samples?
A: We are glad to provide free samples to you, but we do not offer
the freight.
7. Q: What is your after-sale service?
A: We provide after-sale service and offer 100% guarantee on our
products.
