The Intersil ICL7660 and ICL7660A are monolithic CMOS power supply
circuits which offer unique performance advantages over previously
available devices. The ICL7660 performs supply voltage conversions
from positive to negative for an input range of +1.5V to +10.0V
resulting in complementary output voltages of -1.5V to -10.0V and
the ICL7660A does the same conversions with an input range of +1.5V
to +12.0V resulting in complementary output voltages of -1.5V to
-12.0V. Only 2 noncritical external capacitors are needed for the
charge pump and charge reservoir functions. The ICL7660 and
ICL7660A can also be connected to function as voltage doublers and
will generate output voltages up to +18.6V with a +10V input.
Contained on the chip are a series DC supply regulator, RC
oscillator, voltage level translator, and four output power MOS
switches. A unique logic element senses the most negative voltage
in the device and ensures that the output N-Channel switch
source-substrate junctions are not forward biased. This assures
latchup free operation.
The oscillator, when unloaded, oscillates at a nominal frequency of
10kHz for an input supply voltage of 5.0V. This frequency can be
lowered by the addition of an external capacitor to the “OSC”
terminal, or the oscillator may be overdriven by an external clock.
The “LV” terminal may be tied to GROUND to bypass the internal
series regulator and improve low voltage (LV) operation. At medium
to high voltages (+3.5V to +10.0V for the ICL7660 and +3.5V to
+12.0V for the ICL7660A), the LV pin is left floating to prevent
device latchup.
Features
• Simple Conversion of +5V Logic Supply to ±5V Supplies
• Simple Voltage Multiplication (VOUT = (-) nVIN)
• Typical Open Circuit Voltage Conversion Efficiency 99.9%
• Typical Power Efficiency 98%
• Wide Operating Voltage Range
- ICL7660 . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5V
to 10.0V
- ICL7660A . . . . . . . . . . . . . . . . . . . . . . . . . 1.5V
to 12.0V
• ICL7660A 100% Tested at 3V • Easy to Use
- Requires Only 2 External Non-Critical Passive Components
• No External Diode Over Full Temp. and Voltage Range
• Pb-Free Plus Anneal Available (RoHS Compliant)
