Seals tight,Good thermal stability EPDM Cold Shrink Tube for For
1/2'' to 1-1/4'' or 1-5/8'' Cable
Introduction:
EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg.
bicycle handle etc. With it’s good performance: water-proof, Acid
and alkali resistance, seal, protection sleeve and low voltage seal
insulation under 1kv.
| Material technical parameters: |
| No | Items | Test method | Unit | Test standard | Remarks |
| 1 | Hardness (Shore A) | GB/T 531.1-2009 | Shore A | 43±5 | |
| 2 | Tensile strength | GB/T 528-2009 | Mpa | 8±3 | |
| 3 | Break elongation | GB/T 528-2009 | % | 800±200 | |
| 4 | Tear strength | GB/T 529-2008 | kN/mm | 38±5 | |
| 5 | Volume resistivity | GB/T 2439-2001 | Ω•cm | ≥1013 | |
| 6 | dielectric strength | GB/T 1695-2005 | MV/m | ≥18 | |
| 7 | dielectric Constant(50Hz) | GB/T 1693-2007 | / | ≤8 | |
Features:
1. Simple installation, requires only workmans hands; No torches or
heat required.
2. Accommodates a wide range of cable sizes.
3. Good thermal stability; Excellent wet electrical properties.
4. Seals tight, retains its resiliency and pressure even after
prolonged years of ageing and exposure.
5. Improved tough rubber formulation to withstand rough
backfilling.
6. Resist fungus; Resists acids and alkalis; Resists ozone and
ultravilet light.
Application reference pic
FAQ
1. Who are we?
We are professional in cold shrink industry. Our products have been
exported to America, Australia, Egypt, Taiwan, India, Indonesia,
Egypt, Spain, Italy and Germany etc, Europe countries. Currently,
we already cooperated many famous companies in electrical and
telecommunication industry.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
