The wisest choice: Rapid Temperature Test Chamber with MIL-2164A-19
B-T-225(A~E)
Product use:
Appliance:
Rapid Temperature Test Chamber Price is applied to test the materials in heat-resistance,
cold-resistance, dry-resistance, moisture-resistance. It is simple
to operate and program easy to edit. It can show the set values and
operative time.
Temperature Humidity Climatic Test Chamber Price applied to test
the prodcuts quality, such as electronic, plastic products,
electrical appliances, instruments, food, vehicles, metals,
chemicals, building materials, aerospace, medical care and so on.
Standards:
The performance index meets the requirements of GB5170, 2, 3, 5,
6-95 verification methods for basic parameters of environmental test equipment for electrical and electronic products
low temperature, high temperature, constant humidity and
alternating humidity heat test equipment
Basic environmental test procedures for electrical and electronic
products test a: low temperature test method GB 2423.1-89
(IEC68-2-1)
Basic environmental test procedures for electrical and electronic
products test B: high temperature test method GB 2423.2-89
(IEC68-2-2)
Basic environmental test procedures for electrical and electronic
products test CA: constant damp heat test method GB/T2423.3-93
(IEC68-2-3)
Basic environmental test procedures for electrical and electronic
products test Da: alternating damp heat test method GB/T2423.4-93
(IEC68-2-30)
ETC...
1 The whole box adopts the integral structure. Box structure
2 The inside of the box is made of 1.0mm imported SUS304B stainless
steel plate, the outside is made of 1.0mm cold rolled steel spray,
and the thermal insulation material is made of ultra-fine glass
thermal insulation cotton.
3 The door is sealed with double-layer silicone rubber sealing
material.
4 The observation window is made of multi-layer conductive film
tempered insulating glass with a size of 350×500mm. In order to
prevent frosting of the glass at low temperature, the built-in
special safety voltage heating wire is specially built to surround
the heating belt with a power supply voltage of 36V, and a lamp is
set up to provide illumination for observation.
5 A φ50mm test hole with a plug is arranged on the side of the box
body. The plug material is silicone rubber with low foaming, high
and low temperature resistance, with thermal insulation effect.
Rapid temperature change test chamber refrigeration system and
compressor:
In order to ensure the cooling rate of the test chamber and the
minimum temperature requirements, the test chamber uses a set of
Taikang fully enclosed compressor composed of binary overlapping
air cooling refrigeration system. The overlapping refrigeration
system consists of a high temperature refrigeration cycle and a low
temperature refrigeration cycle, and its connecting vessel is the
evaporative condenser. The evaporative condenser also plays the
role of energy transfer, transferring the heat energy in the
working room through the two-stage refrigeration system to achieve
the purpose of long temperature. Refrigeration system design
application of energy regulation technology, an effective treatment
can ensure that in the normal operation of the refrigeration unit
and the refrigeration system of energy consumption and cooling
capacity for effective regulation, so that the refrigeration system
operating costs and failure rate down to a more economic state.
Manufacturer:
| Model | dry heat | B-T-80(A-E) | B-T-120(A~E) | B-T-225(A~E) | B-T-504(A~E) | B-T-1000(A~E) |
| damp and ho | B-TH-80(A-E) | B-T-120(A~E) | B-T-225(A~E) | B-T-504(A~E) | B-T-1000(A~E) |
| Internal Dim (CM) | 40x50x40 | 45x60x45 | 60x75x50 | 70x90x80 | 100x100x100 |
| External Dim(CM) | 75x203x203 | 75X189X110 | 90X177X130 | 100X180X103 | 130X190X123 |
| Relative Humidity | 20％-98％RH |
Temp Range | -70℃~180℃(100℃) (A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃) |
| heat-up time |
1℃-15℃／min |
| Pull down time | 1℃-15℃／min |
| Temp Fluctudtiont | ±0.5℃ |
| Temp Uniformity | ±1.0℃ |
| Temp&Humi.Deviation | ±1.0℃/±3.0℃RH |
| Interior | SUS#304Stainless steel plate |
| Exterior | Coating or SUS#304Stainless steel plate |
| Power Source | AV:220V/380V 50/60Hz |
| Power(KW) | The technical proposal shall prevail |
Our company:
Packing/Shipping:
FAQ:
Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also
customized machines according to your request. Don’t hesitate to
tell us your requirement, we will try our best to meet your needs.
How about your warranty?
Generally, our warranty is one year. Within the warranty period, we
can offer technique support and part parts change, necessarily, our
engineers may go to your place for better service.
How about the packing for machine, is it safely protected during
transportation?
Our machine is packed by standard export wooden box, it won’t be
damaged. We’ve delivered many testing machines abroad by sea or by
air without damage.
