Description
The ATMEGA128-16AU is a high-performance, low-power 8-bit AVR
RISC-based Microcontroller combines 4kb EEPROM, an 8-channel 10-bit
A/D converter and a JTAG interface for on-chip debugging. The
device supports throughput of 16 MIPS at 16MHz and operates between
4.5 to 5.5V. By executing instructions in a single clock cycle, the
device achieves throughputs approaching 1 MIPS per MHz, balancing
power consumption and processing speed.
Features
High-performance, Low-power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
High Endurance Non-volatile Memory Segments
QTouch® Library Support
JTAG (IEEE Standard 1149.1 Compliant) Interface
Power-on Reset and Programmable Brown-out Detection
Internal Calibrated RC Oscillator
External and Internal Interrupt Sources
Idle, ADC Noise Reduction, Power-save, Power-down, Standby and
Extended Standby Sleep Modes
Software Selectable Clock Frequency
ATmega103 Compatibility Mode Selected by a Fuse
Global Pull-up Disable
0 to 16MHz Speed Grade
Application
Power Management, Communications & Networking, Consumer Electronics
