1.Pre-installation preparation and installation requirements:
* The installation site must be dry and the minimum temperature
should not be less than 10 degrees Celsius.
* The maximum humidity change after installation should be
controlled in the range of 40% -60%.
* The installation site must meet the above specified humidity
standards at least 24 hours prior to installation.
* Sound-absorbing board must be placed at the installation site for
48 hours, so that the sound-absorbing board to adapt to the indoor
environment and fixed.
* Acoustic emission grooved panels must be installed according to the design drawings.
Sound-absorbing panels must be arranged to accommodate 300-600mm
pitch.
* If wood batten is use as keel, the distance between two battens
is generally 500mm.
2. Wooden sound absorbing grooved panels are fixed by special light
steel keel
* Fixed acoustic room absorbing material with the keel and screws.
* Insert the fastener H02, H03 with the keel. The distance between
the fasteners should allow the sound absorbing plate to be fixed.
* Installation sequence should be in accordance with the principle
from left to right, from top to bottom.
* If you need to adjust the position of the acoustic panel, you
only need to adjust the clip H02, H03.
Grooved acoustic wall panels specifications
| Grooved Wooden Acoustic Panel |
| 1.Structure | Basic Material ,Finish&Back Finish |
| 2.Basic Material | E1 MDF,FR MDF ,MGO Combination Board etc. |
| 2. Front Finish | Melamine ,Natural Wood Veneer,Paint,etc. |
| 3. Back Finish | Black Acoustic Felt |
| 4.Standard Size | 2440*133 , 2440*197mm,etc. |
| 5.Standard Thickness | 12/15/18mm |
| 6. Standard Pattern | 13-3,14-2,28-4,59-5,etc. |
| 7. Installation | 1.Lightweight steel keel system2.Wooden batten system |
| 8. Fire rate | can meet China Standard Class B1 and BS476 Part 7 Class 1 |
| 9. Eco level | can meet China and EU Standard Class E1 |
| 10.Applications | gymnasium,hotels,exhibition centers,schools,studio etc. |
| 11.Is customized | can be Customized |
Grooved acoustic wall panels details:
1. Structure: base material, surface treatment
2. Basic material: E1 MDF
3. Front Finish: melamine
4. Back Finish: black acoustic fleece
5. Standard size: 2440 * 128, 2440 * 192 mm and so on
6. Standard thickness: 12/15 / 18mm
7. Standard Patterns: 13-3, 14-2
8.Installation:1) Light steel keel system (2) wood batten system
9. Fire rate: Can meet the Chinese standard B1 and BS476 Part 7
Class 1
10. Eco level: Guangzhou acoustic grooved panels can meet the EU and EU E1 standards
11. Applications: Gymnasiums, hotels, exhibition centers, schools,
studios and so on.
12: Customization: Can be customized
