Sliding Ultrahigh Soundproof Folding Movable Wall Panels For High Exhibition Hall Dividers

Sliding Ultrahigh Soundproof Folding Movable Wall Panels For High Exhibition Hall Dividers

Bunge Moveable Divider Walls are a series of individually operated panels along a track system designed for maximum space planning flexibility. They can be arranged quickly, easily and efficiently.

Active shutoff system can be divided into one-way and multi-directional partition. One-way partition, suitable for a simpler space design, each single-piece partition by two horizontal double pulley suspension, can be in the turn, cross and other split mouth movement, each piece can be easily moved to cut off the partition Point, or move to a remote storage room, to play or create a variety of different combinations of space functions.

Multi-directional partition, suitable for more changes in the space design, it can give the maximum flexibility of the facility. When there is no need for the remote between the plate, the hinge hinge will be combined with two pieces of a combination of two-piece, so that the partition quickly and silently in the linear range of movement, can also be double-cut partition in the track Any one end.

When the partition system is activated, its first piece is cut off and connected to the wall wall door, or the first piece of the partition is equipped with a soundproof seal. The end piece with the telescopic engagement section provides a posture of not less than 110 kg when engaged with the end wall to ensure the best sound insulation between the partition and the wall.

Partition door, with single page (U type) and double page (L type) two. The thickness of the door with the overall cut off the same, with the original installation of the engagement accessories, set in the door in the door at the bottom of the maneuvering, effectively solve the uneven surface caused by the gap, to keep the overall aesthetic and good sound insulation.

8> We have many different finish to meet customer different requirement and get different decoration effect.

Operation:

Partitions shall be top supported, manually operated panels stacked in an area nominated in the plans. When closed, the operable wall shall provide a complete sound retardant barrier. No floor track shall be used.

ng system with a Two wheeled nylon trolley made with the base Material of POM 45 tempered steel shall be used as per approved stacking method.

Aluminum trim: The panel trims will be standard series with exposed Aluminum trims of 15mm thickness finished in 6063 – T6 Anodized Aluminum shall be used.