Restaurant movable partition room partition divider Chinese
restaurant room partition wholesale custom-made
In restaurant, we sometimes need to divide a large space into
several small rooms or combine some small space into a large one.
If you are involved in this kind of need, movable partition can be
your choice. Bunge Building Decoration Company is a professional
company specializing in partition manufacture for more than 10
years. IWe have adopted the advanced partition company of USA,
Germany and Denmark. The goal of our company is to provide the best
space solution to our customers and satisfy them with our
professional services.
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Track system | Single or twin point | Single or twin point | Single or twin point |
| Panel thickness | 65mm | 80mm / 85mm | 100mm |
| Panel height | Up to 4000mm | Up to 6000mm | Up to 18000mm |
| Max height | 4000mm | 6000mm | 18000mm |
| Panel width | 600-1230mm | 600-1230mm | 600-1230mm |
| Frame construction | Aluminum frame | Aluminum frame | Aluminum frame |
| Face material | 9mm | 9mm / 12mm | 12mm |
| Fire safety | Optional Class I or O | Optional Class I or O | Optional Class I or O |
| Vertical profiles | Aluminum anodised with sealing profiles | Aluminum anodised with sealing profiles | Aluminum anodised with sealing profiles |
| Retractable seals | Aluminum black with
double rubber seals | Aluminum black with double rubber seals | Aluminum black with double rubber seals |
| Operation of seals | Manual, with supplied
operating handle | Manual, with supplied operating handle | Manual, with supplied operating handle |
| Locking | Optional lock to pass doors | Optional lock to pass doors | Optional lock to pass doors |
| Pass doors | Single open in panel or
double open in two panel | Single open in panel or double open in two panel | Single open in panel or double open in two panel |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
| Weight | Approx 22-35kg/sq M | Approx 25-40kg/sq M | Approx30-48kg/sq M |
How to install the partition?
1.Track installation:Suspension fixed way is at the top of the partition board install
the hanging wheel, and connected to the track suspension. The track
and hanging wheel should be chosen according to the partition size
and load weight.
2.Partition panel installation: according to the design drawing, draw on each partition panel to
mark the line wheel, fix the wheel with screws on the partition
board top; Then the panel be put into track, let each panel in the
perpendicular to the ground; Test and push-pull flexible rotation,
and finally to fixed connection.
3.Debugging: movable panel need to discretion, sealing and so on debugging
after installed. Then cleaning up the panel, complete the
installation work
Accessories details:
Track: The tracks are made from extruded 6063 - T5 anodized aluminium.
The track housing shall utilize grooves and interlocking steel pins
for positive alignment of adjacent track sections, and shall be
reinforced overhead by drop rod brackets. Aluminum track housing
shall include an integral nut slot to accept a hardened square nut
for attaching each drop rod bracket to the top of the track.
Panels:The Panels will be made from 12mm MDF boards and shall be 100mm
thick and 1230mm maximum width, made to the appropriate acoustic
rating and structural backing and mounted in full perimeter
extruded aluminium frames with interlocking corner construction
.The panel faces shall be finished with selected material.
Panel Surface Finish:The panel surface will be as per the clients requirement finished
either in Sliwal factory - China or by others. The normal finish
such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom and as
well as closure seals for the operable wall system.Retractable seal
drop will be 23mm.
How do the movable partition wall work?
1. The continuously hinged panels are pulled from their parked
position to 'close' (or extend) the wall and pushed back to the
parked position to 'open' (or fold)the wall. Final flat alignment
of wall panels is assisted pneumatically by a gas piston located in
the top track. A lever or recess handle is fitted to the lead panel
and this combined with a vertical rebated profile provides the
system with its pass door. The door is available with or without a
lock cylinder.
2. Our easy lock-up set.
Retractable pressure seals on top and bottom are extended and
retracted by a single 180°turn removable operating handle.
3. Retractable Pressure Seals.
Once the panel is positioned, they are sealed in place with
retractable pressure seals.
4. Telescopic sleeve panel.
Final closure of the wall is achieved by extending a telescopic
sleeve on the last panel. The sweep strip simultaneously extends
the top and bottom. The rubber sealing strip on the side edge of
telescopic panelcan seal the wall tightly to reach acoustic
integrity.
FAQ
1. Are you a manufacturer or trading company?
We are a manufacturer, and this is our address: No.39-2, Nanwei
Road, Hailong street, Longxi Avenue, Liwan District, Guangdong
Province, China.
2. What is the price of the movable wall?
Our mobile wall system is customized, the cost is calculated by
area, the thickness of different walls and the price of different
finishes are different. Therefore, we need you to provide us
detailed dimensions such as height, width and finish requirements.
If possible, we also need your layout drawings.
3. Is the movable partition acoustic (soundproof)?
Yes, our movable wall system is soundproof. We have different
acoustic material fillings and various sound absorbing panels to achieve different acoustic
ratings. For the 65 series we can reach 45db, for the 80 type we can reach 48db, the 85 type can
reach 50db, for the 100 type we can reach 50db.
4. Q: How to install an active partition? Is it difficult to
complete?
It is not difficult to install our active partitions. Our active
partition is a hanging rail type moving wall that does not require any ground track. Therefore the hanging rail
structure will be very important. We have very detailed drawings and videos showing how to install, so
your employees just need to follow them step by step.
5. Q: Do you provide sample?
Yes, and the sample is free, you just pay the express delivery fee
is ok.
6. Q: What is your payment terms?
30% - 50% of total amount by T/T as deposit when confirmed the
order and balance paid by T/T before loading container, or irrevocable L/C at sight.
7. Q : What is your warranty ? What do we do in case of problems?
3 years quality warranty is provided, including frame unfading nor
peel-off, hardware and accessories working properly under correct operation.In case of our
quality problem, we will provide replacement by international courier. Immediate delivery of
replacement parts with available in stock, and if not stocking, the time should be depending on material
ordering time which is normally 10 - 15 days.
Very velcome to visit our Web and contact us!
Send us a question below to get a movable wall catolog and special
discounts!
