Interior Soundproof Material Fabric Movable Wall Operable
Soundproof Wall Partition Cost
Technical information:
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 18000 mm |
| Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
| Face material | 9 mm | 9 mm | 12 mm |
| Pass doors | Single door or Double door |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Specification:
In the past, there are special occasions where a large space was
divided into different levels and different specifications. It took
a lot of steps to complete the work, and the space that may be
distributed sometimes is not particularly reasonable due to
technical reasons.
It will be affected, and this problem has been effectively solved
since the rise of movable partition wall. The use of movable
partition wall to separate the large space and the effect is
outstanding, and it is very simple to use, no problem, and its The
so-called active partition is the performance of free movement.
Installation movable wall partition is free to place its own
position, and unsatisfactory can be properly moved without spending
too much time.
Soundproof partition wall feature:
Hinged pair panels for quick and easy operation.
Robust aluminum frame construction for demanding environments.
Room divider wide range of surface finishes.
Partial and fully operating panels available.
Partition divider just only top hung supported without floor track.
Sliding aluminium track more details:
1. Remember that the rails are loose enough on all brackets.
Guaranteed track pause time.
2. Tighten all rail connections and adjust the rail height
correctly. The rail mounting direction must also be straight and
horizontal.
3. In the installation of track facilities, sound insulation and
mineral wool are necessary for installation.
4. There are "L", "T" and "Ten" spurs for the track. There are left
and right points for the connection of the steering. It is
generally not recommended to use the "10" spur. L and T are trimmed
to their corresponding size, and their position is indicated by a
numerical marker.
Advantage:
Panel faces are suspended from a steel frame with just 2 points of
contact. The edges of panel faces are slotted into aluminium
profiles.
This method of cladding the steel frame allows the panel faces to
be acoustically separated from each other and thereby minimize the
transfer of sound waves through the system.
Each panel has an extruded aluminium male profile to one vertical
edge and a female profile to the other.These profiles are fitted
with magnetic membranes which ensure positive interlocking of the
panels.
Once the wall panels have been adjusted for height and level the
roller stems are locked with a fail-safe mechanism to ensure that
the panels will align perfectly every time the wall is set up.
Pressure seals extend from the top and bottom of each panel
exerting a closing pressure of 2kn providing panel stability and
excellent acoustic sealing.
Application:
Increasingly, flexible and efficient space utilization is becoming
a must for offices, hotels, exhibition centers, studios and
similar. Intelligent solutions are needed that facilitate
multifunctional room and etc. You have at your disposal operable
partition systems capable of harmoniously combining
daylight-flooded and sound insulated room concepts.
Operation:
A large amount of repairs are as a result of incorrect operation by
users. Movable wall panels are deceptively heavy due to the ease of
operation but are capable of serious crush injuries. Your work
place risk assessments should have taken this into account and
state that only trained and authorized personnel may operate the
wall. we will offer training on the safe and correct operation of
your system to your staff.
Movable walls and sliding folding partitions do have a life cycle
and there is a point where maintenance and repairs become either
impossible or uneconomical.
