Popular Retractable Acoustical Sound Insulation Operable Movable
Wall Partition Panel For Banquet Hall
BUNGE partition wall description
Sliding Partition Wall is aluminum framed wall, tongue-and-groove
unitized wall panel system,used to cut the big space to small room
for different function.Let us assist you get the best flexible
solution for your place and turn the room you have into the space
you love.Usually the sliding door is used in big area like
multi-purpose hall,conference hall,stadium,exhibition hall and so
on.
We offer:
A full professional design service
Pre-sale consulant
Using top grade materials and components
Survey and installation guide and supervision
A rich experienced work team
Maintenance contracts- to ensure your valuable asset remains in
good condition
Application
Conference rooms
Training rooms
Call Center
Reception areas
Hotel
Stadium
Exhibition Hall
Restaurant
Gymnastics
Features&Benefit
Strong aluminium frame construction for demanding environments.
Hinged paired panel or Mono panel meets your different requirement
Wide range of surface finishings for your choice.
Passdoor incorporated enabling access to adjoining rooms.
Parking one or both ends.
Top hung and floor with rubber seals achieving excellent barrier
effect.
Specifications of partitions:
Technical Parameter
for Partition Panel | Panel Width | 500 - 1230mm |
| Panel height | 2000 - 6000mm |
| Sound proof | 36 - 50 db |
| Operation | Manual |
| Frame | Aluminum |
| Vertical profile | Anodised aluminum profiles with integrated magnetic
strip and sealing edges on the inside |
| Finish options | Fabric , veneer , HPL melamine , vinyl , carpet , customers own
material,
Bare finish |
| Base options | Plywood , Gypsum , steel , MDF |
| Max width | Unlimited |
| Panel weight | 25 - 40 kg / sq |
| Pass door selection | door | Single or double door |
| Seals | Top | Manual |
| bottom | Manual |
Installation:
Preparing
1) Constructing location : keep dry , the temperature should be
higher than 10'C , the widest humidity range should confined to 40%
- 60% after construction 24 hours before constructing , the
location should reach the standards as above.
2) Acoustic panels : for the acoustic panels accommodated to the
circumstance of constructing , please place the panels in the
constructing location for 48 hours , check up the type ,
specification and amount of the panels before constructing .
3) Keels : fix the keels on the wall flatly according to the plan ,
the keels should be flat , slick , no rust , no metamorphosis ; the
wall must be construct according to the standards , the keels
suitable install with acoustic panels , leave smaller than 500mm
space between each wooden keel ( smaller than 600mm of light steel
keel ) , install the keels vertically with acoustic panels .
Fixing
1) Size of wall : all panels should be installed in accordance with
the manufacturers recommendations .
2) Cutting : all necessary hardware and accessories for a complete
job installation are to be furnished by the contractor .
3) Install the acoustic panels : the installation of acoustic
panels should be carried out in a sequence from the left to the
right , from upside to downside , the panels are cut to fit on site
, traditional woodworking tools are suitable for cutting the panels
, if panels are cut using a fine tooth table saw the panels should
be cut face up to avoid scratching and at a much slower speed to
avoid any tearout or chipping .
4) Fix on keel:
a) Wooden keel fixing using nails , staples or screws into prefixed
timber battens on the walls via the tongue and groove joint .
b) Also can fixing by : Light Steel Keel ( size : 18 * 26 * 3000 mm
, use clip ( size : 45 * 38 mm ) to fix. ( needs 2.1 m of keel and
17 clips per m2 )
