Banquet Hall Decorative Types of Folding Conference Room Partition
Walls
Description of Folding Partition Walls
BUNGE folding partition walls are able to supply you with acoustic
partitions that will look good and last for years to come, with
endless possibilities of surface finishes, from standard laminate,
real wood veneers, painted finishes, black board, or ready to
onsite decorate by customer i.e. painting / wallpapering etc.
Conference room partitions are top hung so have no floor tracks,
and are more forgiving on uneven floors, with sound reduction
available up to 52db.
Options include full height or inset pass doors, and glazing
panels, easy to operate each panel,is manually positioned and
secured into place with a winding handle to operate the mechanical
seals top and bottom.
All of our folding partition walls are of the highest quality, very
robust and easy to manoeuvre, and manufactured in the China, the
conference room partitions panels can be stacked either in-line
(single point suspension) or off-line at either end of the top
track (two point suspension), with different track variations
possible to suit your needs.
Folding partition walls allow you to segregate your space for
maximum potential, and are the perfect flexible space-saving
solution for areas that require a partition with a higher
specification.
Features of BUNGE Folding Partition Walls System
1.Folding partition walls can separate the space speedy and
conveniently.
2.Muti-function: sound insulation,heat insulation,fireproof
function.
3.Top hung system without the need for a floor track.
4.The folding partition walls are made from high density aluminum
frame, special made rubber, excellent sound insulation cotton and
finish surface, etc.
5.Around the folding partition walls panel, there is sound
insulation rubber, it can help to insulate the sound entering.
Technicals of Sound Proof Partitions
| Description of the whole system |
| Item | Sound proof partitions |
| Partition Height | From 2 meters to 15 meters. |
| Sound Transmission Class(STC) | From 32db to 53db. |
| Optional Mode | Connected & seperated, sealed & non sealed |
| Description of accessories |
| Series | Type 65, Type 80, Type 100 |
| Track System | Clear anodized 6063-T6 aluminum track;Imported dupont POM material
roller,bearing capacity from 225kg to 250kg. |
| Junction | "T"junction, "L" juntion, cross/ "X" juntion. |
| Finishes | 15mm fabric acoustic panel, Wood veneer, Laminate, Melamine, PU
etc. |
Installation of Folding Partition Walls
1. After the folding partition walls rail is transported to the
construction site, the construction personnel should first
understand the general decoration style of the site, including the
ceiling shape, the ground shape, whether there is a skirt line on
the wall, etc., timely communicate with the on-site woodworker, and
then release the line to determine the track installation.
position;
2. After the horizontal line is placed, the construction side will
determine the layout direction of the air-conditioning duct
fire-fighting pipe, and it is convenient to determine the steel
structure installation form, whether it is a straight pull or a
diagonal support or a U-slot fix. These are responsible
installation teams. Do the preparation before the construction,
otherwise work and do things, when the impact on the site
construction layout, but also to rework, seriously affect the
construction progress, will also bring unnecessary trouble to Party
A;
3. After the folding partition walls track is installed, the track
level will be self-checked again, and finally the steel structure
will be rust-proofed, and then Party A will be notified and the
position of the track movable port will be clearly stated. When the
ceiling is clearly indicated, it cannot be fixed with the track.
Otherwise,the conference room partitions panel will likely damage
the integrity of the ceiling.
