Battery Tab Spot Welding Machine High Power Multi-Pulse Power
Supply
Function Introduction
1. Pneumatic precision welding head
Horizontal welding structure, double linear guide design, left and
right pressure can be adjusted separately. Built-in pressure
sensor, precise control to apply stable pressure.
2. Adjusting mechanism of welding head
The welding head can be adjusted up and down to increase the
distance between the desktop and the welding head. Can weld a
variety of different heights, different types of cells.
3. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent
the damage caused to the desktop during welding. At the same time,
it can increase the fluency of welding and increase the welding
efficiency.
4. Electric control
No additional air source, low noise, fast welding speed, stable
pressure.
Equipment introduction
● This lithium battery spot welding machine adopts pure electric
cylinderless design, low noise and stable pressure.
● Motor drive, control box precision control, three modes
adjustable.
● CBLD-26 multi-pulse lithium battery spot welding machine adopts
proprietary output energy optimization algorithm, output voltage
and output current conversion reasonable, strong welding ability,
firm solder joint, no virtual welding, small cremation, excellent
surface quality.
● Independent research and development of precision welding head,
precise pressure adjustment control.
● Microcomputer technology control, control grid voltage, automatic
tracking compensation.
● APPLICABLE BATTERY SPECIFICATIONS: MINIMUM NOT LESS THAN 50MM,
MAXIMUM NOT MORE THAN 130MM. (Can be used for heightened type)
● The welding platform adopts high-quality tempered glass to
protect the table top from wear during the welding process.
● The vertical spot welding method is spot welding, and the
pressure depth is manually controlled.
● Digital LED display, equipment parameter adjustment is more
intuitive, easy to learn and operate.
● The welding machine can pre-store multiple programs, which can be
changed and called at will.
● Compact structure, small size, high power, large industrial
circuit design, safe and reliable welding process
Technical specification
| Welding thickness | 0.02-0.18MM | Welding power supply | Multiple-pulse |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 130MM (Maximum pitch adjustable) |
| Supply current | 3000A | Welding speed | 180P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Equipment power | 12KW | Equipment size | 600*900*1300MM |
| Driving mode | Electric | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Welding case
FAQ
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
