21700 Lithium Battery Sticker Machine Positive Electrode Sticker
Machine
Equipment introduction
● The sticker machine is controlled by a PLC stepper motor and
cylinder to complete the function of pasting highland barley
insulation paper onto the positive electrode of the
18650/21700/21650 finished battery.
● Approximately 4000 finished cylindrical batteries can be
completed per hour.
● Stickers and stamping are stable, with high placement consistency
and low defect rate.
● Fault information reminder function, fault sound and light alarm,
can quickly diagnose faults.
● Equipped with the function of clearing tailings, it can clear
tailings with one click.
● Use a cylinder driven cutting knife for stamping, which can punch
4 batteries at a time.
● Slices are made of high-speed steel, with high wear resistance,
good product quality, and high production efficiency.
● Adopting a 7-inch high-definition touch screen, real-time
monitoring of machine operation status.
● Compatible materials: highland barley paper, express bus paper,
Oblaat, RET protection sticker, etc.
● The mechanical structure design is simple and generous, and the
system performance is stable.
● Aluminum alloy structure, electrostatic powder spraying process,
scratch resistance, rust prevention, and anti-static.
Technical specification
| Production efficiency | 60-70PPM | Air source specification | 1/CFM |
| Applicable battery specifications | 18650/21700/21650 | Pass rate | ≥95% |
| Sticker efficiency | ≥60PPM | Transmission mode | Mechanical hand |
| Compatible material | Highland barley paper, fast bus paper, glutinous rice paper, RET
protective stickers, etc | Maximum impact speed | 99.99% |
| Work method | Stepper motor + pneumatic | Machine Dimensions | 1275*860*1524MM |
| structural material | aluminium alloy | Machine Weight | 150KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Cylindrical cell sticker |
Appearance structure
Function Introduction
1. Hd touch screen
7 inch HD touch screen, real-time display of machine running
status. With fault alarm device, quickly determine the fault point,
after adjustment can continue production.
2. Large hopper
Large feeding hopper, slope type hopper, suitable for the whole box
feeding, feeding convenient. One-time 300PCS18650 battery cell.
3. Loading mechanism
Ensure that the adhesive material is not affected by the
environment. The loading operation is simple.
Debugging project
- Wear highland barley paper steps
- Adjust the press cutter
- Adjustable center position
- Loading step demonstration
- On-line debugging
- Replace stamping tool debugging
Matters needing attention
- Do not touch any operating components during the operation of the
equipment
- Automatic highland barley paper pasting machine applies positive
pole insulation protection paper to the battery cell, and places
the battery according to the requirements
- Timely cleaning of punching and pasting waste materials
- Regular maintenance of stamping tools
- Regularly discharge the water stored in the oil water filter
- Avoid stamping foreign objects with stamping tools, which may cause
tool jamming
FAQ
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery type?
2) Which battery type do you want to be compatible with?
3) Paste materials.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
