● Rating
Do not use products beyond the rated current and rated voltage as
this may create excessive
heat and deteriorate the insulation resistance.
● Storage and Operating Conditions
<Operating Environment>
Do not use products in a chemical atmosphere such as chlorine gas,
acid or sulfide gas.
Do not use products in the environment close to the organic
solvent.
<Storage and Handling Requirements>
1. Storage Period
BNX series should be used within 12 months.
Solderability should be checked if this period is exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85% Avoid sudden changes in temperature
and humidity.
(2) Do not store products in a chemical atmosphere such as chlorine
gas, acid or sulfide gas.
● Notice (Soldering and Mounting)
1. Cleaning
Do not clean BNX series (SMD Type).
Before cleaning, please contact Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions shown in
mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI suppression
filters EMIFILr
may vary, depending on the circuits and ICs used, type of noise,
mounting
pattern, mounting location, and other operating conditions. Be sure
to check and
confirm in advance the noise suppression effect of each filter, in
actual
circuits, etc. before applying the filter in a commercial-purpose
equipment design.
■ Insertion Loss Characteristics
