KL-100x125 Mill Crusher for Laboratory Feed particle Size 100*125mm
General Introduction
The Laboratory crusher is widely used in coal, metal, mining,
electric power, building materials, chemical, pharmaceutical and
Scientific research departments of the laboratory crushing samples.
It has the advantages of stable operation, safety and reliability,
long-term service life, less process, faster sample making, and
processing in the sealed crushing device without dust pollution to
the environment, as well as simple installation, convenience of
use, normally without sieving and shrinking operation.
| Product Parameters |
| Model | KL-100x125 |
Feed particle size | mm | 100*125 |
Rotating speed | r/min | 375 |
Discharge particle size | mm | 2-35 |
| Productivity | kg/h | 30-2000 |
Motor Power | kw | 3 |
| Machine weight | kg | 250 |
Maximum feed particle size | mm | 100 |
Voltage | v | 380 |
Dimensions | mm | 1000*550*580 |
Scope of application | - It is mainly suitable for medium crushing, coarse crushing, coal,
limestone, slag and various medium-hard ores and rocks in
construction, electric power, chemical industry, metallurgy,
geological and other industries and industrial units.
|
Principle of structure
How the laboratory crusher works is that through the role of the
eccentric hammer installed in the end of the motor shaft, turning
the rotation of the motor into the high frequency vibration of the
crushing device supported on the six springs, allowing the impact
block in the crushing chamber to produce high-speed impact to crush
the sample. sealed laboratory sample crusher is consisting of
frame, motor, eccentric hammer, top cover and compression device,
and the top cover is fixed with the smashing device consisting of
impact block, impact ring and impact seat, and the compression
device consisting of bracket locking handle, through six
compression springs supported on the bottom. The components of the
crushing device are made of high-quality steel, precision
processing, with excellent wear resistance. In the impact and
compressive stress, it can form a hard and wear-resistant surface
layer, while the more times it is used, its processing hardness and
wear resistance are better.
| Other Models |
| Model | KL-100x60 | KL-100x150 | KL-150x125 | KL-Disc |
Feed particle size | mm | 50 | 100*150 | 125*150 | 175mm
(diameter) |
Rotating speed | r/min | 600 | 368 | 368 | 78 |
Discharge particle size | mm | 3-10 | 5-25 | 3-25 | 0.15-1 |
| Productivity | kg/h | 45-550 | 480-1800 | 500-3000 | 25 |
Motor Power | kw | 1.5 | 2.2 | 3 | 1.1 |
| Machine weight | kg | 120 | 120 | 280 | 95 |
Maximum feed particle size | mm | 50 | 80 | 120 | 2-3 |
Voltage | v | 380 | 380 | 380 | 380 |
Dimensions | mm | 700*380*480 | 700*380*480 | 1000*450*520 | 690*465*400 |
Workshop
