PCA826T Strong System Integration Vibration Speed Frequency Displacement Sensor

PCA826T Strong System Integration Vibration Speed Frequency Displacement Sensor For Special Vehicle Using

Download the datasheet of PCA826T... please click here ,

PCA826T precise inclinometer for wind turbines.pd...

▶ INTRODUCTION

PCA826T is a high-performance product developed by Rion Technology specially for the high-precision inclination measurement. Before leaving the factory, all products would have full temperature range calibration and compensation, and a two-week long-term stability test ensures compatibility under different working conditions and maintains the best performance indicators during the long-term test cycle. The product integrates the FFT function, which can measure the vibration of 0.5~20Hz, and estimate the vibration frequency of the object to obtain the maximum speed and maximum displacement of the object vibration. Integrate two kinds of output protocols including the industrial standard MODBUS protocol, the supporting computer analysis software can display and record the measurement data in real time. Output interface RS485, RS422, RS232 optional. The non-contact installation makes PCA826T easy to install or integrate. Strong resistance to external electromagnetic interference, strong anti-shock and vibration ability, widely used in satellite communication system processing vehicles, special vehicles, radar antenna vehicles, etc.

▶ MAIN FEATURES

★ Biaxial tilt angle measurement

★ Range ±1～±60° optional

★ Horizontal/vertical optional

★ DC 9～36V wide voltage input

★ Resolution 0.0007°

★ IP67 protection grade

★ Size: L82×W70×H42mm

★ Output mode RS485, RS422,RS232 optional

★ Wide temperature operation -40～+85℃

▶ APPLICATION

★ Wind power monitoring

★ Bridge and Dam monitoring

★ Ancient building monitoring

★ High-speed rail track monitoring

★ Ground satellite communication vehicles

★ Railway gauge ruler and gauge leveling

★ Satellite communication vehicle

★ Geological equipment tilt monitoring

★ Engineering vehicle leveling

▶ SPECIFICATIONS

PCA826T		CONDITION	PARAMETERS				UNIT
Measure range			±5	±10	±30	±60	°
Measure axis			XY	XY	XY	XY
Resolution			0.0007	0.0007	0.0007	0.0007	°
Measure accuracy	MAXE	Room temp.	0.003	0.005	0.01	0.01	°
	RMSE	Room temp.	0.001	0.002	0.003	0.005	°
Zero temp coefficient		-40～85℃	0.0003	0.0003	0.0003	0.0003	°/℃
Sensitivity temp. coefficient		-40～85℃	≤50	≤50	≤50	≤50	ppm/℃
Power on time			<0.4	<0.4	<0.4	<0.4	S
Response frequency			20	20	20	20	Hz
Output rate		5Hz,10Hz,25Hz,35Hz,50Hz,100Hz. Can be set
Ouput signal		RS485/RS422/RS232 optional
EMC		According to EN61000 and GBT17626
MTBF		≥98000 hour/time
Insulation Resistance		≥100 MΩ
Shockproof		100g@11ms,3 Axial Direction (Half Sinusoid)
Anti-vibration		10grms,10～1000Hz
Protection grade		IP67
Cables		Standard configuration 1 meter, wear-resistant, wide temperature, shielded cable, mm aviation connector
Weight		≤400g (Excluding cable)

▶ VIBRATION PARAMETER INDEX

The vibration frequency, speed, and displacement of this product are derived from data analysis. The frequency is the main frequency of the current object vibration frequency, the speed is the maximum speed, and the displacement is the maximum amplitude of the object vibration. Because of the vibration is irregular, the data is for reference only.

Shenzhen Rion Technology Co., Limited(RION for short) is a high-tech company specialized in design and manufacturing MEMS inclinometer, 3D compass. RION has excellent developing team both in software and hardware. In hardware, RION has the ability of manufacture and test advanced inertial navigation and integrated navigation system by equipment such as marble test platform, high-low temperature chamber, super low temperature chamber, single/triple axis turntable, several high precise automatic indexing table, impact-vibration table, 3 axis non-magnetic calibration bench, special vehicle carried dynamic test device and so on. In software, our engineers are composed mainly by professional postgraduates, doctors. we develop the inclinometer, 3D anti-magnet compass etc in China. RION’s business covers the newest technology, tech-equipment and aerospace equipment, new energy, IOT, energy saving and so on. RION’s products are the core parts of automation, intelligence, informationization, digitalization with wide application in engineering machinery, intelligent robot, oil drilling, coal mining, technology equipment, marine surveys, high precise mapping, new energy and so on.

RION is also honored by ISO9001 , 11 software copyright, many products national expertise report, several appearance patent, 2 patent of invention, 7 self-developed core technology.

RION is a Chinese brand with vigor and passion, forging itself to fully self-developed enterprise. Expecting promising future, RION is growing rapidly, providing the best solution in position, attitude and inertial navigation. RION rooted in China, covering the globe, and devote itself to pursuit ever more precise value in position, attitude.