| Robot Ultrasonic Flexible Welding Machine Model:BY-100CSB(SF) |
|
| Type | Detailed Information |
|
| Equipment Introduction | ◆This equipment is used for ultrasonic riveting welding of plastic
parts with the same shape of riveting points and less types. The
robot arm span is 1000mm. At the same time, two six-axis robots
with four sets of ultrasonic welding heads are used to weld them
one by one. |
| ◆Through the sixth axis rotation switch ultrasonic welding joint,
riveting of different shapes of riveting points. |
| ◆10 sets of welding programs can be pre-stored, and the data
interface can run in tandem with the production line. |
| ◆ Swiss TELSONIC ultrasonic suite, small size, stable working
force. |
| ◆ Equipped with man-machine interface and Chinese and English
bilingual interface operation. |
| ◆ Single point riveting time 3S. |
| Equipment Features | Man-Machine Engineering | ◆Safety: the equipment is equipped with emergency stop button,
safety fence, safety grating. |
| ◆Permission management: device setting administrator and operator
permissions. |
| ◆The work table height is 900MM. |
| ◆ Device start mode:single point start. |
| Equipment capability/Quality traceability | ◆The device has the protection function of misoperation(the machine
will not work if the machine is not operated according to the
standard operation procedures). |
| ◆The equipment has a limited memory function, which can record the
necessary parameters in the production process and output them
(required by the customer). |
| ◆Alarm failure and code recording:The equipment automatically
displays the alarm fault code and records it automatically |
| ◆Man-machine interface - visual information of man-machine
interface includes current operation steps, alarm information and
solutions. |
| ◆IMS interactive function: support Ethernet communication. The
equipment has the function of QR Code scanning and identification.
The data of hot plate temperature, displacement and time can be
recorded and sent to the company's IMS system. (This function is
customized according to customer requirements.) |
|
| Equipment Clamp/Quick die change | ◆Turntable design,with two stations of taking & putting workpieces
and cutting, taking & putting workpieces and cutting never affect
each other, thus, improving the working efficiency. |
| ◆The parts of the equipment are fixed in simple, fast and reliable
way, such as locating pin.To achieve rapid mold change without
special tools. |
| ◆Automatically locate the welding position of the product through
the cylinder clamp to ensure the welding position is accurate. |
| Electrical layout/Safety | ◆The equipment can judge the wrong product placement direction or
product model through the sensor. If the product placement is
wrong, there will be alarm information in the man-machine
interface, and the three-color light will show the fault. |
| ◆Locking function - when the product is misplaced or the model is
not a production model, the product is locked in the station
(requires a designated person to unlock). |
| ◆Equipment alarm: when the equipment fails, the man-machine
interface displays alarm information, and the control system locks
the machine. |
| ◆Control system voltage DC24V. |
| ◆I/O- each station has a 10% I/O allowance for future expansion. |
| Technical Parameters | ◆Equipment demension(security fence)(L)4500MM*(W)4200MM*(H)2200MM. |
| ◆Maximum allowable die size of
equipment(one-piece)(L)1200MM*(W)800MM*(H)350MM. |
| ◆Electric power requiement: 3 phases 380V 50Hz(If there are special
requirements, customer confirmation is required.). |
| ◆The outlet pressure of the air compressor:
4Kg/cm2-6Kg/cm2(约0.4MPA-0.6MPA). |
| ◆Adaptable to ambient temperature: -5℃～４0℃ |
| ◆Adaptalbe to humidity : ２０％～８０％ |
| ◆The noise of the transmission part shall not exceed 90 db. |
