Ozone Aging Test Chamber Lab Instrument GB/T7762-2008 For Plastic
Products Testing
Product use:
This ozone aging test equipment can be used for rubber products
such as vulcanized rubber, thermoplastic rubber, cable insulation
sheaths and other products, under static tension or continuous
dynamic tension deformation, or intermittent dynamic tension and
static tension alternate deformation After exposing to a closed,
non-illuminated air containing constant ozone concentration and a
constant temperature test box, the sample is tested for a
predetermined time, and the degree of cracking or other performance
changes on the surface of the sample is evaluated to assess the
resistance of the rubber Ozone aging performance. With advanced
processing equipment, superb manufacturing technology, strict
management system, strong technical strength and good after-sales
service, it is the preferred supplier of major scientific research
institutes, famous enterprises and universities.
GB/T7762-2003 static test method and GB/T136421992 dynamic test
method; ASTM D-3041,ASTM D-1171,ASTM D-1149
Technical parameters:
1. Temperature range: 0~70, RT+10~70
2. Humidity range: 40%~98%R.H, 65%~98%R.H
3. Temperature fluctuation degree: ±0.5
4. Temperature uniformity: 2
5. Temperature deviation: ±1.5
6.Humidity fluctuation: +2, -3%R.H
7. Heating rate: 0.7~1.0/min
8. Cooling rate: normal temperature drops to 10 20min / unlimited
9. Ozone concentration: 10~1000pphm
10. Gas flow rate: 12~16mm/S
11. Ozone sample rack: static and dynamic tensile test sample rack
(specify when ordering)
12. Sample rack rotation speed: 360 degree rotating sample rack
(rotation speed 1r/min)
13. Time setting range: 0~9999 hours
14. Power requirements: AC380 (±10%) V/50HZ three-phase five-wire system
market value:
Ozone aging test chamber, as the name suggests, is a kind of test
equipment to identify the weatherability of products by simulating
or accelerating the aging situation of ozone in the atmosphere to
rubber. So, for ozone aging test box in today's society market situation,
its market value and reflected in where. The market value and application prospect of ozone aging test
chamber are discussed here.
Today, both at home and abroad, the idea of environmental testing
is gaining momentum. In order to meet the growing needs of today's society, people's
research and development of new materials is on the rise. At the
same time, in order to test the weatherability of new materials and
the adaptability of special environment, more and more test
equipment has been put on the stage of scientific development. We are familiar with UV aging test chamber, salt spray test
chamber, high and low temperature test chamber, vibration test
bench, ozone aging test chamber and so on. Today we will talk separately about the market value and
application prospects of ozone testing in terms of gas corrosion.
Rubber problems have temperature, moisture, light, ozone, etc., in
order to test the weatherability of ozone products, the damage of
temperature and moisture to materials has been concerned by people,
increasingly developed industry caused by a variety of corrosive
gases mixed in the air, such as ozone, its destruction of materials
or products is a very severe test, It can lead to cracking, degradation, pulverization, hardening and
other damage of rubber products. With the development of industry, the application of ozone weather
test will increase. Today, ozone aging test chamber can be used for rubber products
such as vulcanized rubber, thermoplastic rubber, cable insulation
sheath and other products, under static tensile deformation,
exposed to closed without light containing constant ozone
concentration of air and constant temperature test chamber,
according to the scheduled time to test the sample, from the
surface of the sample cracking or other performance changes, Ozone aging test chamber is used to scientifically and reasonably
realize the aging cracking test of non-metallic materials and
rubber products, in order to evaluate the ozone aging resistance of
rubber, and to provide a solid scientific basis for human screening
and improvement of new materials.
product description:
Model | B-CY-120 | B-CY-250 | B-CY-500 | B-CY-1000 |
Internal Dim(DxWxH) | 45x45x60 | 50x60x75 | 70x80x90 | 100x100x100 |
| Temperature range | 0℃-70℃ |
| Humidity range | >65%R·H |
Ozone concentration | 0-200PPm.0-300PPm |
Temperature fluctuation | ±0.5℃ |
test apparatus |
Dynamic and static (optional) |
Sample rack rotation speed |
360 degree rotating sample holder (1 rpm per minute) |
Gas flow rate | 12-16mm/s |
Temperature Controller |
Imported LED digital display P.L. D+5.5, R microcomputer integrated
controller |
Time controller |
Precision hours,minutes,seconds time controller |
Ozone concentration analysis |
Imported concentration analysis regulator 4-20mA outputs,RS232
communication port |
Ozone generator |
Silent discharge tube type |
Security protection |
Leakoge,short circuit,over temperature,motor
overheating.over-current protection |
Our Company:
FAQ
Customer: What about the transportation?
Answer: It depends on your requirement. We can delivery by air to your
airport, or by sea to your seaport, and we can also delivery to
your office address by express courier, and we also accept to
co-operate with your ship agent or forwarder.
Customer: What about the after-sale service?
Answer: Guarantee period is 12 months, after the warranty, we also provide
life-long paid repair or service. Response within 24 hours for any problems. Overseas training, installation is available.
Customer: What about the delivery date?
Answer: Usually we offer 15workdays after order confirmed and payment
received, and we can also accept urgent order for prompt shipment.
