TUSB9261IPVP Bridge Type UART Interface IC 2nd Gen SuperSpd USB 3.0 To ATA Brdg

TUSB9261IPVP UART Interface IC USB Interface IC 2nd Gen SuperSpd USB 3.0 to ATA Brdg

1 Features

Universal Serial Bus (USB)
– SuperSpeed USB 3.0 Compliant – TID

340730020

– Integrated Transceiver Supports SS/HS/FS Signaling

– Best-in-Class Adaptive Equalizer

– Allows for Greater Jitter Tolerance in the Receiver

• – USB Class Support

  • – USB Attached SCSI Protocol (UASP)

  • – USB Mass Storage Class Bulk-Only Transport (BOT)

  • – Support for Error Conditions Per the 13 Cases (Defined in the BOT Specification)

  • – USB Bootability Support

  • – USB Human Interface Device (HID)

• – Supports Firmware Update Via USB, Using a TI Provided Application

• SATA Interface
– Serial ATA Specification Revision 2.6

– Gen1i, Gen1m, Gen2i, and Gen2m

– Support for Mass-Storage Devices Compatible With the ATA/ATAPI-8 Specification

• Integrated ARM Cortex M3 Core

• – Customizable Application Code Loaded from EEPROM by SPI Interface

• – Two Additional SPI Port Chip Selects for Peripheral Connection

• – Up to 12 GPIOs for End-User Configuration

– Two GPIOs have PWM Functionality for LED Blink Speed Control

– Serial Communications Interface for Debug (UART)

• General Features

– Integrated Spread Spectrum Clock Generation Enables Operation from a Single Low-Cost Crystal or Clock Oscillator

– Supports 40 MHz

• – A JTAG Interface is Used for IEEE1149.1 and IEEE1149.6 Boundary Scan

• – Available in a Fully RoHS-Compliant Package

2 Applications

• External HDD/SSD
• External DVD
• External CD
• HDD-Based Portable Media Player

3 Description

The TUSB9261 is an ARM® Cortex® M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP)- compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives, and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class BOT and USB HID interfaces.

Device Information