LMC6036IMTX/NOPB Audio Power Amplifier IC Op Amps Low Power 2.7V Single Supply CMOS Operat

LMC6036IMTX/NOPB Audio Power Amplifier IC Op Amps Low Power 2.7V Single Supply CMOS Operat

FEATURES

• (Typical Unless Otherwise Noted)

• LMC6035 in DSBGA Package

• Ensured 2.7V, 3V, 5V and 15V Performance

• Specified for 2 kΩ and 600Ω Loads

APPLICATIONS

• Filters

• High Impedance Buffer or Preamplifier

• Battery Powered Electronics
• Medical Instrumentation

• Automotive Applications

DESCRIPTION

The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump DSBGA) using micro SMD package technology. Both allow for single supply operation and are ensured for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its ensured 2.7V operation. This provides a “comfort zone” for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035/6 gives these op amps a broad range of applications for low voltage systems