MTP Femal to MTP Male Fiber Cables MTP Patch Cable SM OM3 Usconec
APC UPC Low Loss
Description
UT-King’s MTP trunk cable, a cost-effective alternative to
time-consuming field termination, is designed for high-density
fiber patching in data centers which need space saving and reduce
cable management troubles. With US Conec MTP connectors and Corning
Clearcurve fiber, it is optimized for 40G QSFP+ SR4/CSR4, 100G
QSFP28 SR4 optics direct connection and high-density data center
applications.
Please note: The US Conec MTP connectors are fully compliant with
the MPO standards, achieving higher performance levels when
compared to generic MPO connectors.
MTP fiber patch connectors make use of precision molded MT ferrules
with metal guide pins and precise housing dimensions to ensure
fiber alignment when mating. MTP fiber cable can be mass terminated
in combinations of 4, 8, 12, 24 and 48 fiber ribbon cables and are
typically used in high-density backplane and Printed Circuit Board
(PCB) applications within data and telecommunications systems.
Features
- Backbone installation
- 100% tested before delivery
- MTP And MPO available
- Use 12/24 Cores Fiber Connector
- Trunk Cable Counts usually 12 / 24 / 36 / 48 / 72 /96 / 144-fibers
- 3.0/3.6 mm Round Cable or Customized
- SM/OM1/OM2/OM3/OM4 or Customized
- LSZH, OFNR, OFNP available
- Compliance with Telcordia GR-1435-Core Compliant
Specification
| Performance Level | Standard Loss | Low Loss |
| Connector | Mode | Endface | IL(max) (dB) | RL(min) (dB) | IL(max) (dB) | RL(min) (dB) |
| MPO/MTP | SM | 12F/APC | ≤0.70 | ≥60 | ≤0.35 | ≥60 |
| 24F/APC | ≤0.75 | ≥60 | ≤0.35 | ≥60 |
| 48F/APC | ≤0.75 | ≥60 | | |
| MM | 12F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 |
| 24F/PC | ≤0.50 | ≥20 | ≤0.35 | ≥20 |
| 48F/PC | ≤0.50 | ≥20 | | |
Detailed Images
FAQ
Q: Are these in stock?
A: No, there is a lead time to build all MTP cable assemblies.
Q: What is the difference between MTP and MPO?
A: MTP is the USConec brand name MPO that we use. The terms are
interchangeable.
Q: How do I know what gender I need?
A: Gender refers to the metal guide pins coming out of the endface
of the MTP. Most transceivers (QSFP modules) have male pins, so
you'll need female cables to interconnect them.
Q: Where are these manufactured?
A: In our Melbourne, Florida, USA manufacturing plant.
Q: If I'm connecting directly from transceiver to transceiver, what
polarity cable do I need?
A: You'll probably need a Method B Female to Female cable. Please
check with your documentation to confirm.
