SH115B insulating oil dielectric loss and resistivity tester is a
high-precision instrument with integrated structure for measuring
dielectric loss angle and volume resistivity of insulating oil and
other liquid insulating media. The main components such as
dielectric loss oil cup, temperature controller, temperature
sensor, dielectric loss test bridge, AC test power supply, standard
capacitor, megger, DC high voltage source are integrated inside.
The heating part adopts the currently advanced high-frequency
induction heating method, which has the advantages of non-contact
between the oil cup and the heating body, uniform heating, fast
speed and convenient control. AC test power supply adopts AC-DC-AC
conversion mode to effectively avoid the impact of mains voltage
and frequency fluctuation on the accuracy of dielectric loss test.
Even if the generator generates electricity, the instrument can
operate correctly. The internal standard capacitor is SF6
gas-filled three-pole capacitor. The dielectric loss and
capacitance of the capacitor are not affected by ambient
temperature, humidity, etc., to ensure that the accuracy of the
instrument is consistent after a long time of use, and the
measurement of resistivity complies with GB/T5654.
The internal part of the instrument adopts full digital technology,
all intelligent automatic measurement, multiple mode measurement,
and is equipped with a large screen (320 × 240) Touch display, full
Chinese menu, Chinese prompt for each step, test results can be
printed out, and operators can use it skillfully without
professional training.
| Product model | SH115B |
| Product Name | Insulation oil dielectric loss and resistivity tester |
| Manufacturer | Shandong Shengtai Instrument Co., Ltd |
| Testing items | Integrated with major components such as dielectric loss oil cup,
temperature controller, temperature sensor, dielectric loss test
bridge, AC test power supply, standard capacitor, high resistance
meter, DC high voltage source, etc. The heating part adopts the
currently advanced high-frequency induction heating method |
| Compliant with standards | GB/T5654 |
| Simple technical features or parameters | The instrument adopts fully digital technology internally, with all
intelligent and automated measurements, multiple modes of
measurement, and is equipped with a large screen (320 × 240) Touch
screen display, full Chinese menu, with Chinese prompts for each
step, test results can be printed out, and operators can
proficiently use it without professional training |
Transformer Insulating Oil Tester Electrical Resistivity Meter
Insulation Oil Tester Transformer Oil Dielectric Loss Test
Equipment
Insulating Oil Measuring Instruments Dielectric Loss Angle and
Resistivity Tester
Oil Dielectric Loss Tester Oil Resistivity And Dielectric Loss
Tester
Insulating Oil Dielectric Loss And Resistivity Tester
SH115B(Automatic-cleaning)
Technical parameters
| Conditions of use | -15℃∽40℃ RH＜80% |
| Electrical source | AC 220V±10% Unrestricted frequency |
| AC high voltage output | 400V∽2200V ±2% every100V 50VA |
| DC high voltage output | 200V∽600V ±2% |
| Temperature controlled induction furnace | The most powerful500W |
| Temperature control range | <100℃ |
| Temperature control error | ±0.5℃ |
| Resolution of temperature measurement | 0.1℃ |
| Temperature control of time | At room temperature to90℃ Less than20min |
| Measuring range | tgδ C x R | Unlimited 15PF-300PF 10M-10T |
| Resolution | △ tgδ: △ Cx : △ Rx : | 0.001% 0.01pF 0.01 |
| Fine degree | △ tgδ: △ Cx : △ Rx : | ±(reading*0.5%+0.040%) ±(reading*0.5%+0.5PF) ±reading * 10% |
| Relative dielectric constant | εr | According to the Cx Automatic calculation with the same precision
Cx |
| Volume resistivity | ρ | According to the Rx Automatic calculation with the same precision
Rx |
| Overall dimensions: 450×310×360mm Heavy volume:20Kg |
Packing list of insulating oil dielectric loss resistivity meter
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Instrument host | 1 | set | |
| 2 | Oil cup
| 1 | piece | |
| 3 | Test temperature sensing wire | 1 | piece | |
| 4 | Data acquisition line | 1 | piece | |
| 5 | Inspect 2KV high-voltage test line | 1 | piece | |
| 6 | Send to test line | 1 | piece | Black/long/clip at one end/connector at one end |
| 7 | Measuring cup | 1 | piece | 50ml |
| 8 | Power cord | 1 | piece | |
| 9 | Instructions | 1 | copy | |
| 10 | Packing list | 1 | copy | |
| 11 | Certificate warranty card | 1 | copy | |
Company Introduction
Shandong Shengtai Instruments Co., Ltd. is specialized in the
research and production of experimental testing instruments and
industrial testing instruments. It is a professional instrument
company integrating instrument research and development,
manufacturing, sales and service. Its products are widely used in
food, flour, grain and oil, Feed, electricity, petrochemical,
industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always been adhering to the
"first-class service, customer first" as the purpose, "reasonable
price, honesty and trustworthiness" as the business policy. Adhere
to technical innovation, with rich knowledge of the technical team
and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most large-scale and competitive
enterprises in the industry, with the strength of technology
research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant
technical breakthrough has been achieved in the development of
function expansion and intelligent control system.
OUR service
After-sales service commitment, our company to sell the product
after-sales service commitment: warranty period of one year,
long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement
of the equipment, the freight and maintenance of the instrument;
outside the warranty period, the seller shall waive the maintenance
fee and charge only the cost of the basic materials and freight
charges when the instrument is malfunctioning and the seller shall
not charge the maintenance fee during the warranty period.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood
board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your
goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
