Climate Chamber Constant Temperature Environmental Constant
Temperature Humidity Climatic Test Chamber
Uses:
Thermal shock test chamber is suitable for high and low temperature
shock test of electronic components and materials. Thermal shock
test chamber is perfect test equipment for electronic components,
metals, chemical materials, automation components, communication
modules, defense industry, aerospace industry, BGA, PCB substrate,
electronic chip IC, semiconductor ceramics and polymer materials
for automotive industry, aircraft industry, electronics, materials,
laboratory calibration, university research.
Characters:
1. The most advanced latest and European style explosion-proof
handle, perfect shape design, high quality appearance.
2. Large LCD touch screen
3. impact by changing the air grille to pull the hot and cold
temperature into the test area for forced testing.
4. Impact time: 0.1~999.9 hours; cycle time: 1~9999 times, can be
set.
5. Various temperature ranges and humidity ranges
6. 50mm diameter test holes on both sides of the test chamber,
which can be connected with external power or signal lines
7. Adopt high efficiency repetitive compression refrigeration unit
imported from Europe and America, low noise and energy saving.
8. Adopt PID automatic calculation control, high precision of
temperature control.
9. Automatic cyclic shock or manual selective shock can be carried
out, and two-slot or three-slot cold and heat shock can be
selected.
10. Use environmental protection refrigerant R404, R23, no
pollution to ozone.
Specifications:
| Test dimension | 46×46×46cm | 56×66×56cm | 68×68×65cm | 80×80×76cm
|
| Shelves dimension | 36×36cm | 46×56cm | 60×60cm | 70×70cm |
| Temperature range | High temperature zone:normal~+150°C |
Low temperature zone:normal~-60°C
|
| Hoting&cooling speed | 1.5°C per minute average |
| Temperature fluctuation | less than ±0.5°C |
| Temperature deviation | less than ±2°C |
| Temperature conversion time | less than 10s
|
| Temperature recovery time | less than 5min |
| Impact method | cylinder conversion
|
| Materials | external materials:SUS#304 stainless steel
|
| Internal materials: SUS#304 stainless steel |
| Cooling system | water-cooled or air-cooled, Taikang compressor in Franch,
environment friendly refrigerant
|
| Controller | programmable temperature controller in Japan |
| Standard accessories | view windows, cable hole, lighting devices |
| Design standard | GB/GJB/IEC/MIL |
| Power | 7.5KW 12KW 26KW 15KW AC380V/50Kz, three phase |
| Remarks | It can customize by customer demands. Technology index refer to
product description. |
About us:
1. who are we?
We are based in Guangdong, China, start from 2018,sell to South
Asia(20.00%),Eastern Asia(20.00%),Domestic
Market(15.00%),Southeast Asia(15.00%),Eastern Europe(10.00%),North
America(10.00%),Oceania(5.00%),Western Europe(5.00%). There are
total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Industrial Machine, Vending machine, Fire Testing Equipment,
Environmental Test Chamber, Textile Testing Equipment, Toys Testing
Equipment, Wire and Cable Test Machine
4. why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW；
Accepted Payment Currency: USD, EUR, JPY, AUD, HKD, GBP, CNY;
Accepted Payment Type: T/T,L/C,D/P D/A, Credit Card, Western Union,
Cash;
