Press-Locked Steel Grating – Common, Integral, Louver, Heavy Duty.
Press-Locked Steel Grating – Common, Integral, Louver, Heavy Duty
for Building Facade, Platform, Stair or Shelf
Press-locked steel grating also can be called pressure locked
grating, it is made of low carbon steel or stainless steel. With
the performance of high bearing capacity, non-slip, anti-corrosion
and easy to install and remove, pressure locked grating is widely
used for ceilings, platforms, floors, fence and all kinds of cover
in the factories, civil and commercial buildings.
Two press-locked steel grating with different mesh sizes which
people often use: 33 mm × 33 mm, 33 mm × 11 mm.
Press-locked steel grating features:
- Light weight. high bearing capability and high strength.
- Non-silp. anti-corrosion.
- Not easy to deform
- Beautiful appearance.
- Easy to install and remove.
- Extended the lifespan.
Press-locked steel grating Classification of serrations:
- Materials: low carbon steel and stainless steel.
- Surface treatment: galvanized, painted or powder coated.
- Surface type: smooth surface and serrated surface
- Serrated surface type:
- S1: Trapezoidal teeth on the bearing bar.
- S2: Trapezoidal tooth both on the bearing bar and cross bar with
the highest non-slip performance. In this three types. it is most
popular.
- S3: The non-slip tooth is applied to the connect components. It has
the lowest non-slip performance.
Types of press-locked steel grating by insertion angles and
insertion modes.
Press-locked steel grating common type:
- After the grooving of bearing bar, the cross bar press locked and
molded.
- Maximum machining height of common steel grating is 100 mm, the
length of steel grating is less than 2000 mm.
- The standard height of bearing bar: 20 mm to 170 mm.
- The standard thickness of bearing bar: 2 mm, 3 mm, 4 mm, 5 mm.
Table 1: Common Mesh Spacing for Bearing Bars from 2 to 3 mm of
Common Press-Locked Steel GratingBearing Bar
mm | Cross Bar
mm |
|---|
| 11.1 | 11.1 | 16.65 | | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 15 | 11.1 | 16.65 | | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 21 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 22.2 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 33.3 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 44.4 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 55.5 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 66.6 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 99.9 | 11.1 | 16.65 | 21.0 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
Table 2: Common Mesh Spacing for Bearing Bars from 4 to 5 mm of
Common Press-Locked Steel GratingBearing Bar
mm | Cross Bar
mm |
|---|
| 21 | 16.65 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 25 | 16.65 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 33.3 | 16.65 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 50 | 16.65 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 66.6 | 16.65 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
| 99.9 | 16.65 | 22.2 | 33.3 | 44.4 | 49.95 | 66.6 | 99.9 |
Integral type
- The bearing bar of integral steel grating has the same height as
cross bar. The grooving depth is 1/2 of bearing bar.
- The height of the steel grating is less than 100 mm. and the length
usually less than 2000 mm.
- The standard height of bearing bar: 20 mm to 100 mm.
- The standard thickness of bearing bar: 2 mm, 3 mm, 5 mm.
Table 3: Common Mesh Spacing for Bearing Bars from 2 to 3 mm of
Integral Press-Locked Steel GratingBearing Bar
mm | Cross Bar
mm |
|---|
| 22.2 | 16.65 | 22.2 | | 44.4 | 66.6 |
| 33.3 | 16.65 | 22.2 | 33.3 | | 66.6 |
| 44.4 | 16.65 | 22.2 | | 44.4 | |
| 66.6 | 16.65 | 22.2 | 33.3 | | 66.6 |
Table 4: Common Mesh Spacing for Bearing Bars from 5 mm of Integral
Press-Locked Steel GratingBearing Bar
mm | Cross Bar
mm |
|---|
| 33.3 | 16.65 | 33.3 | 66.6 | 99.9 |
| 66.6 | 16.65 | 33.3 | 66.6 | |
| 99.9 | 16.65 | 33.3 | | 99.9 |
- Heavy duty steel grating
- Heavy duty steel grating is bit by bearing bar and cross bar in the
1200 tons of pressure under the molding. It is suitable for high
load bearing occasions.
- The standard height of bearing bar: 80 mm to 200 mm.
- The standard thickness of bearing bar: 8 mm, 10 mm, 12 mm.
Table 5: Common Mesh Spacing of Heavy Duty Steel GratingBearing Bar
mm | Cross Bar
mm |
|---|
| 25 | 50 | 75 | 100 |
| 50 | 50 | 75 | 100 |
| 75 | 50 | 75 | 100 |
| 100 | 50 | 75 | 100 |
Louver steel grating
- The bearing bar of louver steel grating open the chute with 30° or
45°. The cross bar grooved and press locked.
- The grating height is less than 100 mm.
- The standard height of bearing bar: 30 mm to 100 mm.
- The standard thickness of bearing bar: 2 mm, 3 mm.
Table 6: Common Mesh Spacing of Louver Steel GratingBearing Bar
mm | Cross Bar
mm |
|---|
| 33.3 | 16.65 | 22.2 | 33.3 | 66.6 |
| 66.6 | 16.65 | 22.2 | 33.3 | 66.6 |
| 99.9 | 16.65 | 22.2 | 33.3 | 66.6 |
Note: According to the different requirements. we can produce the steel
grating with other specifications and spacing
Press-locked Steel Grating Applications:
Press-locked steel grating is widely used for the floor, ceiling,
platform, fence, shelf, decoration of outer wall, sun visor, bridge
and inner and spiral staircases in such place:
- Large-scale shopping malls.
- Construction industry.
- Factories. subway stations.
- Offshore drilling platforms.
- Ships.
- Terminals.
- Other industrial and civil construction.
Press-Locked stainless steel grating for food industry
Press-locked steel grating for chemical platform channel
Press-locked steel grating for stair treads
Press-locked steel grating for partition wall
Press-locked steel grating for floor
