PP Fiber Fibrillated Mesh For The Wals Of Tunnels, Mines, Roofs And Reservoir Prjects With Special Construction

100% virgin polypropylene PP Fiber Mesh Form For Concrete Reinforcement

PP Fiber Mesh Function:

1.PP fiber mesh can improve plastic deformity

2.PP fiber mesh can prolong endurance

3.PP fiber mesh can improve steel protection

4.PP fiber mesh can improve fire resistance Strengthen spurt & fatigue

5.PP fiber mesh can improve tensile, bending & folding strength

6.PP fiber mesh have Strong acid & alkali resistance and good endurance

7.PP fiber mesh can increase seepage resistance and cracking resistance

PP Fiber Mesh Specifications:

PP Fiber Mesh Application:

1.It can be used for concrete reinforcement

2.It can be used for mortar reinforcement

3.It can be used for anti-cracking resistance

PP Fiber Mesh Instruction:

1. PP fiber mesh Length : The commonly used fiber length in concrete is 20mm, and the commonly used fiber length in shotcrete is 10mm

2. PP fiber mesh ratio Design: Usually the fiber content of concrete is 0.9kg/m3, the fiber content of bridge waterproof layer is required to be 1.35-1.8kg/m3, the tunnel spray concrete is the same, and other materials remain unchanged. Among a series of active composite materials such as silica fume, pulverized coal, grinding slag, zeolite powder and fiber, fiber has a relatively good effect on concrete.

3. PP fiber mesh mixer Adoption:Double-axis horizontal compelling mixer and self-dropping cylinder mixer, Double-axis horizontal compelling mixer is better,self-dropping cylinder mixer is used,too.

4.PP fiber mesh mixing process: The crushed stone, fiber, sand into the blender. Stir normally for two minutes, until the fiber is fully developed, then add cement and water, and stir. Usually the material can be put in as usual, but the mixing time should be extended to ensure that the fiber can be fully and evenly mixed.

5.PP fiber mesh stirring time: The purpose of mixing is to make the fiber fully spread into monofilament or net fully spread, so after adding the polypropylene fiber net, the concrete mixture is usually stirred for 2-3 minutes.

PP Mesh Fiber Packing:

0.9kg or 1kg net each PE bag or paper bag

Certification:

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China.  who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. 

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded. 

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.