100% Virgin Concrete PP Fiber Fibrillated Mesh Form For Concrete Reinforcement

100% Virgin Polypropylene PP Fiber Mesh Form For Concrete Reinforcement

PP Fiber Mesh Description

Polypropylene mesh fiber is a kind of fiber made of a special processing and treatment of polypropylene particles interwoven into a mesh. After adding the concrete base material and mixing, the fiber monofilament or network structure can be formed to fully open and form a disorderly support system inside the concrete. Therefore, it can effectively control the early plastic shrinkage and settlement cracks of concrete and cement mortar, and improve the impermeability, crushing resistance and impact resistance of concrete.

PP Fiber Mesh Instruction:

1. Length : The commonly used fiber length in concrete is 20mm while shotcrete is 10mm

2. Ratio Design: Usually the fiber content of concrete is 0.9kg/m3, the fiber content of bridge waterproof layer is required to be 1.35-1.8kg/m3, the tunnel spray concrete is the same, and other materials remain unchanged. Among a series of active composite materials such as silica fume, pulverized coal, grinding slag, zeolite powder and fiber, fiber has a relatively good effect on concrete.

4. Mixing Process:Crushed stones, fibers and sands will be put into the mixer in turn. After two minutes of mixing, the fiber is fully developed, and then add cement and water, and stir normally. The material can be put in as usual, but the mixing time should be appropriately extended to allow the PP Mesh Fiber to be fully mixed.

5. Stirring Time: Generally, after adding polypropylene fiber mesh, in order to make the fiber fully spread, it is necessary to stir for 2-3 minutes

PP Fiber Mesh Function:

PP Fiber Mesh Specifications:

PP Fiber Mesh Application:

1.concrete reinforcement

2.mortar reinforcement

3.anti-cracking resistance

PP Fiber Mesh Packing:

1.0.9kg net each PE bag

2.1kg net each PE bag

3.0.9kg net each paper bag

4.1 kg net each paper bag

Certification:

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China.  who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. 

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded. 

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.