Din Rail Industrial Gigabit Managed PoE Switch 24-ports
24 Port 10/100/1000T 802.3at PoE to 4 Port 1000X SFP Fiber Network
Switch
Fiber PoE Switch 802.3at 30W Advantages
►Support 24x10/100/1000Base-T 802.3af/at + 4x1000Base-X SFP
►10/100/1000Mbps RJ45 Port supports Full/Half-duplex,
Auto-negotiation, Auto MDI/MDIX
►DIP Switch supports one-key VLAN, one-key Ring Management, PoE
Reset and 250m PoE Network
►Support connecting USB-C port for easy management, without the
need to access the RS232 serial port at all
►10K Bytes Jumbo Frame
►IP40 Aluminum Case
►Supports DIN-Rail installation
►-40°C to 80°C (-40°F to 176°F) operating temperature
24 Port Managed PoE Switch 48VDC Overview
ETH-DIMC2424MP series is the L2+ managed 24-port 10/100/1000Base-T
802.3at PoE + 4-port 1000Base-X SFP hardened Ethernet switch. The
switch has 24 TP ports and 4 fiber ports. The TP (RJ45) supports
10/100/1000Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X
connection; the 1000Base-X SFP port supports 1 or 2 core
Single-mode or Multi-mode fiber. With its reliable design and ease
of use, the product is a great choice for integrating networks
consisting of network devices such as IP cameras and wireless
access points between remote locations.
Industrial 24 Port 1000M Ethernet Managed Switch Technical Indexes
| Forward & Filtering Rate | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) |
| 1,488,000pps (1000Mbps) |
| Packet Buffer Memory | 12M bits |
| Processing Type | Store-and-Forward |
| Backplane bandwidth | 110Gbps |
| Max Packet Length | 10K Bytes Jumbo Frame |
| Address Table Size | 8K MAC Addresses |
| Connector | 24 Port 10/100/1000T 802.3at |
| RS485 | 1 x RS485 (Optional) |
| Optical Port | 4-Port 1000X Gigabit SFP |
| USB-C | 1 x USB-C (for Management) |
| RS485 Serial Interface (Optional) |
| Physical interface | Industrial standard 3-pin screw terminal |
| Data type | 1Ch RS485 Bi-Direction |
| RS-485 signals | Data+, Data-, GND |
| Serial port line distance (copper) | 1000 meters |
| Baud rate | 0 ~ 800kbps |
| PoE (Power over Ethernet) |
| Standard: | IEEE 802.3at Power over Ethernet Plus |
| IEEE 802.3af Power over Ethernet |
| Port: | RJ45 |
| Power Pin Assignment | 4/5(+), 7/8(-) |
| PoE Budget: | Up to 720-watt PoE budget |
| Electrical and Mechanical |
| Input Power: | 48~57VDC, Redundant Power (6-pin Terminal Block) |
| Power Consumption: | 8W Max.(PoE in Use<720W) |
| Protection: |
| Power Input Overload: | Automatic Resettable |
| Reverse Polarity: | Present |
| DIP Switch |
| 4-digit DIP switch function | DIP | Function | Settings |
| SW 1 | VLAN | ON - Enabled | OFF - Disabled |
| SW 2 | Ring Management | ON - Enabled | OFF - Disabled |
| SW 3 (to be upgraded) | 250m PoE Network | ON - Enabled | OFF - Disabled |
| SW 4 (to be upgraded) | PoE Reset | ON - Enabled | OFF - Disabled |
| LED Indicators: |
| Power: | Power Status |
| Ethernet (Per Port): | Link/Activity |
| PoE | PoE Status (T1~T24) |
| Fiber: | Gigabit SFP Port: F25~F28 |
| Dimensions (WxDxH): | 149 x 114 x 50 mm |
| Weight: | 0.55Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail mount |
Managed 802.3at Gigabit PoE Switch Ordering Information
Model | Description |
ETH-DIMC2424MP | Industrial L2+ 24-Port 10/100/1000T 802.3at PoE + 4-Port 1000X SFP
Managed Ethernet Switch |
SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
► SFP module is to be purchased separately. |
Mounting Options | ► Default DIN-Rail Bracket installed |
Power Options | ► DIN-Rail Power Supply. Open Wire for Terminal Block. |
► Power Supply is to be purchased separately. |
