CEMA 3500mm Length Self Aligning Return Idler Powder Coated Surface

CEMA 3500mm Length Self Aligning Return Idler Powder Coated Surface

Carrier Friction Self Aligning Idler Screw Conveyor Idler Guide Roller

The Conical roller is also called the vertical roller or the wing roller. It is mainly connected with the self-aligning bracket. It is a product used in the self-aligning roller. The vertical rollers are installed on both sides of the conveyor belt to prevent the conveyor belt from deviating, that is, the tape runs away. When deflected, one side of the wing roller is squeezed, the vertical roller rotates through the shaft on the rotating mechanism of the moving rod, the shaft drives the pull rod to rotate, and the pull rod pushes the entire roller set to rotate at an angle, so that the tape runs smoothly and reliably, and the centering effect is significant. And the structure is simple.

The influence of the flexibility of the roller on the belt conveyor:

During the operation of the belt conveyor, the flexibility of the roller is very important. If the roller is not flexible and the coefficient of rotation resistance is high, the entire belt conveyor system will have to pay a lot of power and consume a lot of electricity. Sometimes it will cause the tape to tear and the motor to burn out. In severe cases, it can cause a fire. Therefore, the selection of idlers with low rotation resistance coefficient (well less than 0.020) is an important part of the design and selection of belt conveyors.

Main Features of Conveyor Self-Aligning Roller

When the position of the belt is changed from its center line on the same plane, the self aligning idlers can correct this condition.
There are three types of self aligning idler: blocking idler, friction idler and taper self aligning idler.
There are used both carrier and return section.
Layout 1 set per 10 sets at carrier section.
Layout 1 set per 6-10 sets at return section.

HEBEI QINYI CONVEYING EQUIPMENT CO.,LTD is founded in 1994, QINYI has professional production workshops and modern production lines. covering an area of more than 60,000 square meters, with the registered capital of more than USD1,888,000.

QINYI mainly engaged in designing and manufacturing bulk conveying systems and equipment, we are specialize in gravity conveyor. roller and pulley.QINYI products are widely used in mining, coal, port, power station,building and metallurgy, etc.

With the high quality, reasonable price, fast delivery, good after-sales service. QINYI has obtained the customer high praise and keep cooperation now.

In order to ensure the quality of the products, QINYI have passed the ISO9001:2000 quality management system certification. According to GB/T19001:2000 standard, QINYI has established a quality management system, which provides a reliable guarantee for the quality stability.

It's our principle in business to honor the contract and keep our promise.

QINYI has exported to Italy, Germany, Hungary, America, Holland, Chile, Tunisia, Malaysia, Vietnam, Philippines, Indonesia, Pakistan and many other countries.

QINYI welcome you to send us the inquiry and other questions, we would like to improve with you together and looking forward to cooperate with you at any time.

Thanks & Best Wishes