High Quality For Cutting Rubber Tungsten Cemented Carbide Waterjet
Cutting Nozzle
Description of carbide waterjet nozzle
1, Standard water jet nozzle
effectively extend the working life of the waterjet sand mixing
pipe and successfully break through 150 hour working time of the
traditional waterjet. It is currently the most widely used model in
the world.
2, RIXIN enhanced nozzle
on the basis of type, further increase of strong performance,
increase its density and hardness, and at the same time make its
wear resistance to a higher leverl
3, RIXIN economy nozzle
using the same material and different production process , the
production cost is greatly reduced, and the performance is well
controlled , the unique golden yellow exterior coating is a good
anti-counterfeiting technology.
4, RIXIN customized nozzle
we can produce according to customer requirement such as special
shape or grinding or cost.
Product name
| carbide waterjet nozzle |
Material
| 100% virgin tungsten |
Color
| grey |
| Standard |
ISO 9001:2008
|
| Dimensions(mm) |
D(6~ 9.45) x d(0.5 ~ 1.02) x L 76.2
|
Feature of carbide waterjet nozzle
1. High hard resistance
2. High corrosion resistance
3. Pressured resistance
4. Wear resistance
5. High bending strength
Application of carbide waterjet nozzle
1. Refers to the high pressure abrasive water jet machine tool jet
exit is used as the abrasive nozzle is mixed with water.Because of
its internal Jet conditions are harsh, the abrasive wear was
accelerated after the water inside the tube is very large, so need
to use very wear resisting material.Materials for manufacturing,
carbide tube structure is very simple,basically consists of two
sections, and a columnar entrance and cone exports.Due to the
different uses its size slightly difference.
2. The use of ultra-high pressure technology can turn ordinary tap
water pressure to 250 ~ 400 mpa pressure, and then through the
inner hole diameter to 0.76 ~ 1.02 mm ruby nozzle spray forming
speed is about 800 ~1000 m/s high speed jet, commonly known as it
is Water arrows, if arrow has the very high energy, can be used to
cut almost all hard and soft materials.Adjust the water jet
pressure and flow, can use its various cleaning objects, such as
glue, paint, rust removal, etc.
3. The carbide water jet nozzle and tube not to cause the premature
wear of pipe, in order to prolong the service life of the carbide
water jet nozzle, before use, first with tube with water, ensure
that the water in the center position.Should pay attention to the
following three questions:
(1) ensure that the water in the center position.
(2) check whether inner hole of tube is straight.
(3) check if water mixed with other hard something.
If there is no on the jet, jet will directly impact the tube wall,
led to the decrease of the cutting speed, at the same time, carbide
water jet nozzle tube service life will be dramatically
reduced.Normal carbide tube wear an from inlet to outlet of
centripetal and continuous wave wear trace.
