79GHz Barrier Gate Anti-smashing Parking Management Distinguish
Vehicle People Radar Sensor Detector
PRODUCT DESCRIPTION
The Radar Detector TZ7-038 Bluetooth version is a non-contact
detection device for targets such as vehicles and pedestrians. It
works in the millimeter wave band. The radar detector transmit
linear frequency-modulated continuous wave signals to the target to
perform high-speed real-time processing on the target's reflected
echoes to achieve fast target Detection.
ADVANTAGES
The Radar Vehicle Detector has the advantages of convenient
installation and maintenance, no need to damage the road surface,
no impact on vehicle access, advanced technology, reliable and
stable operation, high cost performance, convenient setting of
working distance, all-weather and all-weather work, compatible with
straight poles and billboards/fence Advantages such as brake lever
application
PRODUCT SPECIFICATIONS
Equipment name | Barrier gate radar detector (Bluetooth version) |
Working frequency | 77-81GHz |
Transmission power | 12.5 dbm |
Antenna gain | 0 dbi |
Vertical beam angle | 土15° |
Horizontal beam angle | 土45° |
Detection distance | 0.5~6 meters |
Response time | ＜ 100ms |
Signal output mode | switching value |
Mean time between failures | >18000 h |
Working voltage (v) | 9V~24VDC |
Working power (w) | ＜ 2W@12V |
Working temperature range | -40 ° C to +85 ° C |
Working humidity range (%) | 98% Relative temperature 25 ° C |
IP rate | IP 67 |
Size (mm) | 115 * 85 * 20 (mm) |
Weight (g) | 150g |
Pedestrian detection rate (%) | >95% |
Vehicle detection rate (% | >99% |
Communication interface | 485 |
Debugging methods | software debugging, button debugging, and mobile mini program
debugging |
Firmware upgrade method | 485 string upgrade, mobile mini program upgrade |
FUNCTION DESCRIPTIONS
●LED light
Two LED lights. Red is power which will stay on when power-on.
Green is signal detect which it will on when object is detected and
it will be off after object disappear.
●Detectable area setting
Default detection setting is 2.5m straight front,0.7m for left and
right side of pole. Detectable area can be set by mechanical
button.
●Parameters save
Automatically save the parameters setting like detection area and
etc. and remain latest setting after reset.
●RS485 interface
Stable communication. Long communication range.
●Software upgrade
Upgrade on line through serial port. No need to dismantle.
●Steady performance
Free from the impact of sun, dust, rain, snow or other ambient
factors.
●Environment calibration
Environment learning/calibration through button.
●Restore factory setting
Restore through only one button function.
Note
Read carefully before use
1. Under the circumstance of trailers access in logistics park,
where one radar will cause blind spot and therefore
two radars are needed to ensure passage of vehicles. The
installation can not be in parallel with pole. It is
suggested that two radar are installed when the gate is for large
and small vehicles. One is 60-70cm and the other one is 100-110cm
above the ground.
2. The pole must be in off status when it is reset for background
learning.
3. Standing post for the installation of radar must be used if
there’s license recognition or other metal object in
front of radar.
4. The radar is not suggested to be used in the road where there
are exist large area of well lid (usable for small well lid, check
with manufacture before use)
5. It is suggested that the radar not to be used under the
circumstance of turning place
6. No staying under the pole and no following of front vehicle
under the circumstance of same way out and in.
7. The best position for the installation of radar for advertising
pole, fence pole and large-scale fence pole is close to the coming
direction of the vehicle
8. Use independent 12V power,1A-2A. No 12V power supplier from gate
control board.
9. Radar would fail to detect the intruding object when pole fall
exceeding 45%.
