Automatic Dumbbell Shape Sample Making Machine 1-50mm Sample
Thickness/ Number control prototype
WZY-4030A Number control prototype is used to make all blocks or
spline for material detection on non-metallic raw materials, which
can process dumbbell, rectangular, round spline, can also process
the gap for impact spline, can be irregular plane milling into flat
plate
Using CNC technology to control the three-axis linkage system
through the program controller, drive XYZ axis motor and
supplemented by high-speed spindle motor to form a high-precision
machining system, to realize the processing of various graphic
samples.
Proctable graphics:
1. The dumbbell spline:
Support for almost all standard dumbbell type spline production.
Dumbbell graphics program is built into the software, through the
operation interface selection processing, without the user to
prepare the processing program, the operation is easy, easy to
learn. Special shape programs can be contacted by manufacturers for
customization.
2. Rectangular spline:
The most common is the shock spline of 80 * 10. Select the
rectangle processing in the software, input the length and width of
the rectangle and other necessary parameters for processing.
3. Round sample block:
The most commonly used is the circular Vicat temperature test
sample block. Select the circular processing in the software, input
the diameter of the circle and other necessary parameters to be
processed.
4.Straight cutting:
The cutting operation can be controlled manually, or the straight
line processing function in the program can be used to realize the
cutting operation of the plate.
5. Gap processing:
Support beam or cantilever beam will often open the standard gap.
This machine is equipped with the standard gap milling cutters of
R0.1, R0.25 and R1.00, which can produce the three types of gaps
specified in the standard on the spline.
6. Flat milling:
The irregular material can be milling into flat plane machining in
the software and input the length and width and thickness of the
milling surface.
Standard configuration of equipment:
1. Industrial control machine touch screen control, realize linear
motion, plug motion and other processing actions.
2. Electronic hand wheel. The equipment is standard equipped with
electronic hand wheel to achieve accurate spindle position
adjustment.
3. To the knife device. Z-axis to realize automatic Z-axis to
knife, accurate and save time and effort.
4. Standard with single blade, double blade milling knife and gong
knife, suitable for a variety of materials processing.
5. Configured with two kinds of tooling, one for the straight
plate, a well type plate, suitable for different forms of material
clip.
Featured function:
1. High machining precision, fast speed.
Process multiple splines at one time. For example, on the same
piece of material processing dumbbell, rectangular, round, a
processing is completed.
2.With the material water-cooling function. Hot and melted
materials during processing can be cooled using cooling water.
3. Processing and compensation function. You can compensate for the
error in which the material is heated expansion and the machining
is compressed.
Main technical parameters:
| Maximum machining length | 400mm |
| Maximum processing width | 300mm |
| Maximum processing thickness | 50mm |
| Spindle motor speed | 24000r/min |
| Accuracy resolution | 0.003mm |
| The walking speed adjustable | 100-3000mm/min |
| Host size | 971×640×622mm(L×W×H) |
| The wight of the machine | 65kg |
