PCD Grinder with SMC Pneumatic, FAGOR Linear Grating, LCD Monitor
ZT-180 Type CNC Grinder is mainly used for grinding multiple
cutters and parts such as artificial diamond, cubic boron nitride
and hard alloy etc. The machine tool has sufficient rigidity and
precision, which can realize constant pressure grinding and satisfy
the grinding of high-precision and high-finish cutters to obtain
the good grinding result.
Design Features:
1, Average 18 months natural ageing;
2, Adopt SCHNEEBERGER heavy duty and precision linear slide
3, 5-Axises NC and 2 linked machine.
4, Swing mechanism utilizing ball-screw by a servo motor
5,Japan SMC pneumatic system
6, Linear grating and angle encoder of this model is FAGOR
7, Camera with LCD monitor ,real-time online monitoring
8, Optical system for adjustable from 7-45 magnification even 0.05
radius can be grinded and inspected.
Technical Parameters
| Tip Radius | Unlimited |
| Grinding Pressure | 0-450N (adjustable) |
| Spindle Speed | 0-4200RPM (adjustable) |
| Grinding Wheel Size | 150*40*40mm (D*H*T) |
| Grinding Wheel Oscillation Frequency | 0-45/min (adjustable) |
| Grinding Wheel Oscillation Distance | 0-40mm (adjustable) |
| Grinding Wheel Height Adjustment | 140mm |
| Grinding Wheel Traveling Range | 400mm |
| Grinding Wheel Inclination | -13°~+24° |
| Cross Table Swiveling Angle | 270° |
| Size of Cross Table | 210mm*160mm with 4T grooves |
| Readout of Linear Gratings | 0.001mm |
| Spindle Power | 2.2kW |
| Dimension | 1850*2100*1650mm (L*H*W) |
| Net Weight | 2080kgs |
Attention:
1.When inject the oil into the tank, press the upper limit position
indicator to avoid excessive injection.
2.Use the fresh oil. (Kerosene, gasoline, water and other liquids
are prohibitive.)
3.Don’t use the mix oil for the different grades, otherwise the
precipitate will be produced, mechanical failure will be occurred.
4.The broken inlet filter or removed will bring the dirt into the
tank, mechanical failure will happen during the operation.
5.Lubrication pump use the rubber and plastic products, or other
non-metallic material, don’t use the corrosive oil to prevent
corrosion damage.
6.Keep the same power supply with the product description.
7.Make sure the worm is running after turning on the power supply.
8.In order to exclude the air and dust in the tube, pull the handle
limit wheel and fill-in all the lubricant after the piping system
matching.
9.Without oil in the tank, mechanical failure will happen after the
long idling, and make the parts broken.
10.Must be grounded during installation.
11.Don’t push the limit wheel handle from the top to down.
12.Maintenace is available for the regular work.
