UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age

Ask Lasest Price
Brand Name :	HJ
Model Number :	HT-U15
Certification :	calibration certificate (cost additional)
Price :	Negotiatable
Payment Terms :	T/T, L/C
Supply Ability :	20 sets / per month
Delivery Time :	7 days

Add to Cart

Product Details
Company Profile

UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age

Articulate Probe With Flat And Cone Shaped Hand 3.5 – 4.5 Year Age

Standard:

UL 60335-2-24 Household and Similar Electrical Appliances – Safety – Part 2-24: Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers, Annex 101.DVA, Figure 101. DVA.1

Application:

It is used for Hazard Assessment for Moving Parts; and Probes to Simulate Access to Hazardous Parts by Children.

When evaluating potential pinch points, i the probes of Figure 12DV, of the Part 1, Figure 101. DVA.1 and Figure 101. DVA.2 cannot penetrate the opening, or the maximum force exerted by the moving part onto the probe is less than 22,2 N (5 lbf) at any location ACCESSIBLE by the probe; Test Finger Probe

Parameter:

Item	Dimension description	Dimension mm
A	Middle finger length, 95 percentile	55
B	Middle finger diameter, 5 percentile	9.1
C	Hand length, 95 percentile	125
D	Elbow to wrist length, 95 percentile	165
E	Wrist diameter (circumference divided by pi), 5 percentile	32
F	Forearm diameter (circumference divided by pi), 5 percentile	46
G	Minimum hand CLEARANCE (cone shaped hand part), 5 percentile	39.1
H	Cone shaped part at finger attachment	20
I	Hand breadth (flat hand part), 5 percentile	48
J	Wrist breadth (used for the hand thickness – flat hand part), 5 percentile	24
K	Hand breadth at finger attachment (flat hand part)	36
L	Upper arm length, 95 percentile	a
Notes: 1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe. Test Finger Probe 2 – The finger "tip" is developed to match the dimensions of the UL articulated probe. The diameter from the tip to the first joint then tapers from the tip dimensions to the finger diameter. The joints are spaced equally along the finger length. 3 – The probe is designed to permit the hand to "bend" with respect to the arm using a hinge pin located 6 mm (0,24 in) from the hand length (wrist end) and the hand is restricted in bending not more than 90° with respect to the arm. ^a If the upper arm is required to evaluate a part it shall consist of a flexible tube attached at the end of the lower arm, as the exact position of the elbow cannot be readily determined from the data points chosen.

Product Tags:

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age

UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age

UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age

UL 60335-2-24 Articulated Probe

55mm Finger Length Articulated Probe

32mm Wrist Diameter Test Finger Probe

UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age

You May Like

Nylon Handle Figure 1 50mm Sphere Test Finger Probe A

IEC Lab Test Instrument 2.5mm Rod Figure 3 Test Finger Probe C

Ф1.0mm Wire IEC Figure 4 Terminal Test Probe D

500g 50mm Diameter Steel Sphere Figure 5 Test Probe 1

HT-I06 12.5mm Diameter Sphere Figure 6 Test Finger Probe 2


*From:	Your email address is incorrect!
*To:	HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!