ENIG Dual Layer PCB 4mil Laminate Circuit Board Immersion Gold

2 Layer PCB Printed Circuit Board Black Solder Mask Immersion Gold

• Main Features:

1 2 Layer FR4 substrate material printed circuit board.

2 ROHS, MSDS, SGS, UL, ISO9001&ISO14001 Certificated.

3 FR4 TG150 material, pcb thickness is 1.2mm.

4 Black solder mask and white silkscreen.

5 35um copper on each layer.

6 PCB size is 250mm*90mm/2pcs.

7 Surface treatment is immersion gold 1u'.

8 Customized pcb, need customer to send us the gerber file or pcb file.

• S1150G Material Data Sheet:

• FAQ:

Q1: What is pcb stiffner?

A1: When working with flexible PCBs there are times when we need certain parts of the flexible printed circuit board to be rigid. We do so by adding mechanical support to parts of the PCB. This mechanical support is called a PCB Stiffener.

Flexible PCBs have many advantages like the capability to bend, twist, and fold. However, it is challenging to add/solder components and interconnects to these boards. A PCB Stiffener can be used to make a part of the board more stable/rigid so that it becomes easier to add/solder components or interconnects to the stiffer parts of the board. PCB stiffeners are usually not an integrated part of the PCB. They are only used to provide mechanical support to certain parts of the board.

Other advantages of PCB stiffeners include the reinforcing of solder joints, an increase in abrasion resistance and better handling of the board for automated pick-and-place component placement and soldering.

PCB stiffeners are usually made from FR4, Polyimide or aluminum. The thickness of FR-4 stiffeners varies from 0.003"(0.08 mm) to 0.125" (3.18 mm). The polyimide stiffeners are available with a thickness of 0.005" (125μm), 0.001" (25μm), 0.002" (50μm), and 0.003" (75μm). Polyimide stiffeners are usually a low-cost alternative to FR-4 as they are punched on a die instead of routed with a drill bit. To get better rigidity and heat sinking properties, aluminum stiffeners are used.

How are PCB Stiffeners Attached to Flexible PCBs?

There are two main methods to attached PCB Stiffeners to a flexible PCB - Thermal Bonding and Pressure-Sensitive Adhesives (PSA). The properties and differences of each approach have been highlighted in the table below:

Witgain Technology Limited was established in 2007. Factories locate in HuiZhou City and marketing locates in ShenZhen City. The total area of two factories is around 10000 square meters. We can offer 2-layer and multi-layer pcb services to our customers, highest to 24 layers and rigid-flex pcb, ceramic pcb, HDI pcb, heavy copper pcb are also included. To meet our customer's diversified demands, we also accept prototype orders, small batch orders and big batch orders. Quality and technology is what we value most and we will never stop improving our capabilities. Our customers' satisfaction is always what we are seeking for.