Fuji SMT machine XPF - L The SMT production line equipment, and
spare parts, service:
Features of Fuji Mounter XPF-L :
1. The placement head can be automatically replaced during
production
Realize the world's first automatic work head replacement.
Because the high-speed work head can be automatically replaced with
a multi-function work head during the operation of the machine, all
components can always be mounted with the best work head.
It is also possible to automatically change the working head for
applying adhesive, and it is possible to apply adhesive and mount
components with only one machine.
2. No need to worry about the balance between high-speed machine
and multi-function machine
By realizing automatic replacement of working heads, the boundary
between high-speed machines and multi-function machines ( no
borders ) is eliminated .
For all types of circuit boards, because the balance between the
machines is always in the optimal state, the capabilities of the
machines can be maximized.
3 , XPF-W is mapped to the maximum size of the circuit board 686 mm
× 508mm
The XPF-W, a large circuit board compatible model, can support a
circuit board size of up to 686mm × 508mm , and can also support a
circuit board weighing 6kg.
Target circuit board size (L × W) : MAX457mm × 356mm thickness 0.4
( 0.3 ) ~ 5.0mm/MIN50mm × 50mm Board loading time: 1.8sec | Machine size: L:1,500mmW:1,607.5mmH:1,419.5mm (transport height :
900mm , except signal tower) Machine weight: This machine: 1,500kg MFU-40: about 240kg (when fully loaded with W8 feeder) BTU-AII: about 120kg , BTU-B: about 15kg , MTU-AII: about 615kg (
full load tray and feeder inch ) |
Number of nozzles: 12 (rotating automatic head replacement) Number of collections of automatic replacement heads: 2 Target components: 0402 (01005) ～20 × 20mm height MAX3.0mm Placement cycle time: 0.144sec/ each 25,000cph Mounting accuracy: small chip components, etc. ± 0.050mmcpk ≧ 1.00~
± 0.066mmcpk ≧ 1.33 QFP element ± 0.040mmcpk ≧ 1.00~ ± 0.053mmcpk ≧ 1.33 | Number of nozzles: 1 (single nozzle) Number of automatic replacement heads: 6 (when using the tray, the
height of the collection and measurement of the tray is
automatically replaced with 1 head ) Target components: 1005 (0402) ～45 × 150 ( 68 × 68 ) mm height
MAX25.4mm Mount Beat: 0.400sec / a 9,000cph Mounting accuracy: small chip components, etc. ± 0.040mmcpk ≧ 1.00~
± 0.053mmcpk ≧ 1.33 QFP element ± 0.030mmcpk ≧ 1.00~ ± 0.040mmcpk ≧ 1.33 |
Number of nozzles: 4 ( M4 automatic head replacement) Number of automatic replacement head collections: 1 Target components: 4 suction nozzles : 3 × 3 ～14 × 14mm , 2 suction
nozzles : 14 × 14 ～22 × 26mm height MAX6.5mm Placement cycle: 4 nozzles pick up : 0.343sec/ each 10,500cph~2
nozzles pick up : 0.456sec/ each 7,900cph Mounting accuracy: QFP components ± 0.040mmcpk ≧ 1.00~ ± 0.053mmcpk
≧ 1.33 | Component packaging: Material band components (JIS standard, JEITA) , material tube
components, tray components
Other options: Tube feeder, wide-angle positioning camera, dipping flux unit, roll
mounting table (built-in type), pin coplanarity inspection, special
nozzle & mechanical chuck, Fujitrax |
Supply all original new and used SIEMENS nozzle at good price:Shenzhen Xinyinglong Electronic Technology Co., Ltd focuses on providing electronic manufacturers with the following
SMT equipment:
MPM printing machine, Koh Young SPI, Easa reflow soldering, HELLER reflow
Siemens placement machine, FUJI Fuji placement machine, Panasonic
placement machine, Universal Placement machine, Yamaha placement
machine, /KNS placement machine Meilu
AOI, Vitronics Soltec reflow soldering, non-standard automation
equipment, placement machine rental leasing
and other entire SMT production line equipment, as well as SMT
parts, SMT supporting materials, Services and solutions.
Sell & Buy Smt machine and spare parts.
