SWT-V250/90A Semi-Automatic Automatic HDPE Polyethylene Butt Welder
Plastic Pipe fittings Fusion
Packaging & Delivery
Port:Tianjin Port
Lead Time:
| Quantity(Units) | 1 - 10 | >10 |
| Est. Time(days) | 5 | To be negotiated
|
Fusion Welding Machine Features:
The CNC hydraulic control box is available for all MM-TECH basic
model machines, coveringthe size from O.D 50mm through O.D 1200mm.
Fully encased control box makes the protection level up to IP 54.
Due to the unique powertrain, it could not only create sufficient
hydraulic power during weldingprocedure, but also it makes sure the precise control.
And most importantly, it greatly reduce the weight of control box.
And the servo-motor appliedsignificantly reduce the failure possibility and maintenance cost.
All connections sockets are located at the back of hydraulic
control unit, including sockets fortrimmer tool and heating plate. No additional power distributor is
needed.
Various welding standards (DVS, ISO, WIS, etc.) could be
pre-installed by different languagesupon your request.
All welding reports could be saved immediately to internal memory
with a capacity of 2000reports after welding accomplished, or print the report.
Meanwhile, it is available for downloading through the USB
interface.
All MM-TECH V-CNC series hydraulic control box is featured with PLC
touch screen, extremelyuser-friendly RFID access technology.
Troubleshooting and program upgrade are available for remote
control.
When heating plate hook up with machine chassis, inserting or
release the heater will becontrolled remotely by hydraulic unit, which is same as trimmer.
These characteristics prevent the operators from being injured.
Fusion Welding Machine Specification:
| Welding Range | 90mm-250mm |
| Reducing Inserts | 90mm-110mm-125mm-140mm-160mm-180mm-225mm-250mm |
| Ranges of Application | PE,PP and PVDF |
| Working Voltage | 230V±10%,50/60Hz |
| Total Power8 | 4.25KW |
| Heating Plate | 2KW |
| Planning Tool | 1.5KW |
| Hydraulic Unit Motor | 0.75KW |
| Environment Temperature | -10°~45° |
SWT-V250A includes:
*A machine body with 4 clamps and 1 automatic console with quick
connector;
*A Teflon coated heating plate with separate temperature control
system;
*A electrical milling cutter;
*Hydraulic hoses with quick couplings;
*Support for milling cutter and heating plate.
Automatic Metal Bending Machine Application:
After-sales Service:
We always provide high quality products and workable price for
every clients and have won the trust,
enjoy a good reputation in the market.
Machine Quality Guarantee: 24 months.--If any parts broken or does
not work under normal operating,
we provide them for free!
