RPS2K Series Pen Type Digital Oscilloscope
Specification
| RPS2K Series Pen Type Digital Oscilloscope Specifications |
| Model | RPS2005 | RPS2010 | RPS2025 | RPS2050 |
| Analog Bandwidth | 5MHz | 10MHz | 25MHz | 50MHz |
| HORIZONTAL SYSTEM |
Real-time Sample Rate | 50MHzSa/s | 100MHzSa/s | 200MHzSa/s | 400MHzSa/s |
| Memory Depth | 32K | 16K | 8K | 4K |
| SEC/DIV Range | (0.1us~10s)/div | (33.3ns~10s)/div | (16.7ns~10s)/div | (8.33ns~10s)/div |
| VERTICAL SYSTEM |
| VOLTS/DIV Range | 100mV—100V (0.1V -0.2V -0.5V -1V -2V -5V -10V -20V -50V -100V) |
| A/D Converter | 8-bit resolution(256 levels) |
| VOLTS Accuracy | 2% |
| Trigger Type | Rising Edger,Falling Edger,Auto Trigger(zero rate),Single Triger |
| Measurements |
| Auto Measure | Frequency,Vmax ,Vmin, Vaver, Vp-p |
| Cursor Measure | Adjust Cursor Measure arbitrary point Volt |
| Input |
| Input Coupling | AC,DC,GND/Ref (Inner Reference Signal ) |
| Input Impedance | 1MΩ 30pF |
| Maximum Input Voltage | 500V-Vpp |
| Display |
| Type | 1.1inch OLED |
| Resolution | 128*64 |
| Two Channels | Virtual two channels |
| Power |
| Charger | USB interface share by battery charging and data transfer, output DC 5V,500mA,input AC 140V~250V |
| Lithium Battery | 3.7V 430mAH |
| Power | ≤1W |
| Mechanical |
| Size | 180*22*30mm |
| Weight | 70g(Without battery) |
