Auto Setting Machine for Clay Brick Production Line, Stacking
Machine, tunnel kiln
Auto Setting Machine, Frame Stacking Machine for Clay Brick
Production Line, tunnel kiln, Hoffman Kiln
Auto Setting Machine for Clay Brick Production Line, Stacking
Machine, tunnel kiln
Which is used to stack the green green brickss after wire brick cut
machine. This machine can be used to improve the automation degree
of brick plant.
Application:
Auto Setting Machines are the most advanced automatic brick setting
machines and used to pick up green brickss as a specified mode from
the grouping belt, then place onto kiln cars or drying cars. It can
be used both in once and twice brick setting system, and available
for drying chambers, hoffman kilns, tunnel dryers, and tunnel
kilns. Auto Setting Machines are the perfected and economic choice
for auto brick manufacturing plants.
Features:
Auto Setting Machines can replace the labor stacking, improve the
productivity
Clamping head can be customized, suitable for different types/size
of bricks
Higher working precision, can finish brick pick-up and place-down
accurately, ensure the fluent production
Fully automatic control system provide easy operation mode
Easy daily maintenance, only need to change spare parts every
certain usage time
Lower power consumption reduce the daily production cost
Stable performance, higher working efficiency, longer service life,
Robot Stacking Machine is your best choice for auto brick
factories.
Specifications:
| Type | Kiln section (M) | Setting outputs ( bricks/hr) | Power(kw) |
| MPJ | M≥6.9 | ≥26000 | 23.4 |
| MPJ | 3.6≤M＜6.9 | ≥25000 | 20.4 |
| MPJ | 2.4≤M＜3.6 | ≥20000 | 20.4 |
Working Principle
After cutting machine, bricks will be pushed onto the grouping
belt/grouping system. By coordination of cutting machine and
grouping system, bricks will be separated as pre-setting mode. Then
Auto Setting Machines will go down to pick up bricks, then move to
the top of kiln cars. Grippers will lower down to place bricks on
the kiln car layers by layers, then go back to the original
position for the next stacking procedure. Auto Setting Machine
grippers can be flexibly customized according to kiln section and
stacking mode.
Overseas Project Show
Clay brick making machines for automatic brick manufacturing plant
are widely exported to the whole world, such as Uzbekistan, Russia,
Indonesia, Vietnam, Myanmar, Malaysia, South Africa, etc. Below are
the projects show for auto clay brick factory, share with you...
Finished Brick Samples
According to different usage purpose, finished bricks can be
divided into out-wall decoration bricks, and inner-wall
construction bricks.
Out-wall decoration bricks come with smooth surface and uniform
color , and normally burning fuel is natural gas or coal powder,
which is showered into the burning kiln by specific tube system.
Out-wall decoration bricks also can be called as Face bricks.
Inner-wall construction bricks, normally featured with rough
surface, but higher strength. Burning fuel for inner-wall
construction bricks is coal, which can be added into the raw
materials, or threw from the top of burning kiln.
Below is the sample for finished bricks, the size, shape and hole
rate can be customized as the production requirements of clients.
Customers Show
With around 20 years experience of international trading, Halstec
has set up more than 200 brick factories all over the world, such
as Indonesia, Uzbekistan, India, Myanmar, Vietnam, South Africa,
Zimbabwe, Bangladesh, etc. Below is the glimpse of our clients,
hope can be your partner in very soon future.
General RFQ...
Q1: What can the machines be used for ?
These brick making machines can be used to produce fired red clay
bricks, solid bricks, hollow bricks, perforated bricks, fired clay
bricks, etc.
If you want to set up one brick factory or brick making plant, to
make bricks and sell bricks, then you will need these machines.
Q2: How much the machines or whole production line?
Price could be huge difference according to different production
requirements. For example, one day make 100000 bricks, one day
200000 bricks, or one day 300000 bricks, would need different
model, different capacity machines, also kilns. So if wanna to get
accurate reference price, then better consider what kind of factory
you want to own first.
You can get reference invest idea as: 200000USD, 500000USD,
1000000USD... etc
Q3: What will be needed for one brick factory?
Actually, when you have an idea to set up brick factory, you have
to think about the land, electricity, workshop, brick machines,
electrical equipment, brick dryer, brick oven/kiln, etc.
Q4: What should be consider before setup one new automatic brick
plant?
-Better to make some investigation for local market requirements,
find out which capacity is good to run, for example, one day 100000
bricks, one day 200000 bricks, or one day 300000 bricks??
-Then confirm the brick type and size, and related daily quantity.
- Get the initiatory design for whole line, which can be reference
for land purchase.
-Confirm the raw materials condition, better make a material test
before purchase land.
-Burn bricks will need burning fuel, so coal powder or natural gas,
which one is available.
-Combine the investment to confirm final design for whole brick
manufacturing plant
-Start purchase and construction work...
