Orange Roller Sieve Clay Brick Making Machines 18Kw 60m3/Hr

Brick Production Line Roller Sieve to Separate Materials as different size 18kw 60m3/hr
Roller Sieve for Brick Production Line to Separate Materials as different size 18kw 60m3/hr
Roller Sieve for Brick Factory
Which can separate big size material from the smaller size, big size will back to hammer crusher for the crushing again. While the smaller size will enter the next machine, such as mixer.

Features:

Sieve net materials is anti-wearing material with longer service life
Beating device is equipped to avoid material adhesive issue
Sieve net diameter is 3mm, can efficiently separate materials
No need maintenance, lower power consumption can save production cost.
Reliable performance can ensure the quality of finished bricks.

Application:

Roller Sieves are mainly used for separate big size materials and smaller size materials. Big size materials will be transferred back to hammer crusher, for another crushing process. While smaller size materials will enter the roller crusher or mixer or other brick making machines according to customer production purpose. According our experience, Roller Sieves are very essential machines for the red bricks manufacture.

Specifications:

Working Principle

Materials after hammer crushers will enter the Roller Sieve, which is driven by the motor and shaft. The net of Roller Sieves comes with 3mm diameter, it means if the material size over 3mm, will go back to Hammer Crusher for another crushing process, while the materials size smaller than 3mm can fell on the belt conveyor and enter the mixing machines for next production procedure.

Overseas Project Show

Automatic clay brick making machines are widely exported to the whole world, such as Uzbekistan, Russia, Indonesia, Vietnam, Myanmar, Malaysia, South Africa, etc. Below are the projects show for auto clay brick factory, share with you...

Finished Brick Samples

According to different usage purpose, finished bricks can be divided into out-wall decoration bricks, and inner-wall construction bricks.

Out-wall decoration bricks come with smooth surface and uniform color , and normally burning fuel is natural gas or coal powder, which is showered into the burning kiln by specific tube system. Out-wall decoration bricks also can be called as Face bricks.

Inner-wall construction bricks, normally featured with rough surface, but higher strength. Burning fuel for inner-wall construction bricks is coal, which can be added into the raw materials, or threw from the top of burning kiln.

Below is the sample for finished bricks, the size, shape and hole rate can be customized as the production requirements of clients.

Customers Show

With around 20 years experience of international trading, Halstec has set up more than 200 brick factories all over the world, such as Indonesia, Uzbekistan, India, Myanmar, Vietnam, South Africa, Zimbabwe, Bangladesh, etc. Below is the glimpse of our clients, hope can be your partner in very soon future.

General RFQ...

Q1: What can the machines be used for ?

These brick making machines can be used to produce fired red clay bricks, solid bricks, hollow bricks, perforated bricks, fired clay bricks, etc.

If you want to set up one brick factory, make bricks and sell bricks, then you will need these machines.

Q2: How much the machines or whole production line?

Price could be huge difference according to different production requirements. For example, one day make 100000 bricks, one day 200000 bricks, or one day 300000 bricks, would need different model, different capacity machines, also kilns. So if wanna to get accurate reference price, then better consider what kind of factory you want to own first.

You can get reference invest idea as: 200000USD, 500000USD, 1000000USD... etc

Q3: What will be needed for one brick factory?

Actually, when you have an idea to set up brick factory, you have to think about the land, electricity, workshop, brick machines, electrical equipment, brick dryer, brick oven/kiln, etc.

Q4: What should be consider before setup one new automatic brick plant?

-Better to make some investigation for local market requirements, find out which capacity is good to run, for example, one day 100000 bricks, one day 200000 bricks, or one day 300000 bricks??

-Then confirm the brick type and size, and related daily quantity.

- Get the initiatory design for whole line, which can be reference for land purchase.

-Confirm the raw materials condition, better make a material test before purchase land.

-Burn bricks will need burning fuel, so coal powder or natural gas, which one is available.

-Combine the investment to confirm final design for whole brick manufacturing plant

-Start purchase and construction work...