CAD CAM Open System Pre Sintered 1530℃ Dental Zirconia Disc

Dental Zirconia Disc

1, Pre-sintered zirconia material has an inherent shrinkage rate associated with each production. This number of shrinkage rate must be input into the milling preparation software to ensure the accuracy of the eventual restoration.

2, When milling our zirconia, always follow these general guidelines.

3, Only use sharp end mills with carbide or diamond coating.

4, Do not use any restoration that has chips or cracks. Remove the units from the disc using a handpiece with a diamond-coated bur.

5, Smooth the support areas with a medium-grit rubber polishing wheel.

Features of Dental Zirconia Disc

YUCERA HT (high translucent) can be used for coping crown and framework. The following instructions provide general guidelines for designing, milling, coloring, sintering, porcelaining and glazing and should be followed very carefully to avoid any loss of aesthetics, fit, durability or overall quality.

YUCERA Technology Co.,Ltd believes in our business and we hope we ‘ve made an impact on yours. OEM is ok for us.

Behind every bright smile is Honchon smile.

high translucent Dental Zirconia Disc Details

High strength for tooth-preserving preparations and all crown and bridge indications.
Scientific data proves our all-zirconia has antagonist preserving wear properties and is not abraded or roughened under occlusal load.
Patented shading system enables highly esthetic all-zirconia or traditional layered restorations.
Excellent aging stability
Easy adjustment

HT Dental Zirconia Disc

* High translucent

* Brilliant bending strength and economic block

* Suitable for coping and framework

Indications

Coping, Inlay, Onlay, Bridge, Crown

Physical Characteristics

Product Features

Safety:No irritation,No corrosion,Good bio-compatibility

Beauty:Natural teeth color can be reproduced

Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp

Durability:Over 1600MPa perturbed strength, durable and useful